Electronics Forum | Wed Nov 04 11:35:01 EST 2009 | dilogic
1. can you load cut tape onto the feeders, or only reels? You can, but you have to use cover tape extender (pretty cheap, though) >2. how about parts on trays (like Atmel AVRs in the QFP package)? You need tray feeder. But you can "make" your own
Electronics Forum | Thu Sep 10 15:29:15 EDT 1998 | matthew park
Tim, What is it? Which ones are you talking about: 0.080" vs 0.008", 0.100" vs 0.010", or 0.050" vs 0.005" pitch devices . If you are saying 0.080",0.100" and 0.050", any pick and place machine can handle that. Well if not, one machine that is ca
Electronics Forum | Tue Aug 31 07:51:28 EDT 2004 | dennispoquiz
I used to do optimization on Panasert MV2F/V,Fuji CP6/4,GSM (Universal),Sanyo TCM 3000 with no problem. My problem now is on my old Sanyo V822 SMT chipshooter. I am working on a multi-block (multi-cavity) PCB panel and i cannot, in any way, mount all
Electronics Forum | Tue Nov 25 18:39:59 EST 2014 | rhcriad
We have an MPM UP2000 stencil printer and have a lot of issues with burned out 6410 driver cards (or driver cards just failing to work). I have looked over these threads and found that this is a common issue with these cards. I understand that thes
Electronics Forum | Sat Sep 05 08:55:57 EDT 1998 | Dave F
| We are writing to have information about the automatic mounting process of flip-chip. | We want to know if it's possible to mount this type of component(flip-chip) with smt tecnology machines.( Pick and Place Tdk or Samsung machines). | Thanking yo
Electronics Forum | Wed Oct 03 12:12:23 EDT 2018 | ceexchange
In my experience, machine life expectancy is all about support. Technological obsolescence has gotten to be minimal over the years. I believe installed base is your best indicator for longevity of support. OEM's will support a machine as long as it
Electronics Forum | Tue Jul 20 09:20:39 EDT 1999 | Dave F
| I recently switched from solder paste in 500 gram jars to 500 gram tubes. I did this to try to limit the time the paste is exposed to the room environment. But we have a need to clean the stencil every 4 - 5 boards which means taking the bulk paste
Electronics Forum | Wed Jul 21 01:24:06 EDT 1999 | Scott McKee
| I recently switched from solder paste in 500 gram jars to 500 gram tubes. I did this to try to limit the time the paste is exposed to the room environment. But we have a need to clean the stencil every 4 - 5 boards which means taking the bulk paste
Electronics Forum | Thu Feb 04 00:06:22 EST 1999 | Chris G.
| Have any of you tested or plan to test your machines for Y2K compliance. I would be interested in what you did or what you plan to do. Which machines? What parameters? | | It seems that it could be a career limiting move to test without getting
Electronics Forum | Fri Feb 24 13:04:17 EST 2006 | patrickbruneel
Hi All, The change over to lead-free is as easy or as difficult as you want to make it The big problem I see with this lead-free transition is that there is no benchmark of acceptability and no defect data (yet) related to visual appearance of a sol
