Electronics Forum | Tue Nov 29 11:45:35 EST 2016 | ttheis
I was able to repair the original power supply for the printer again with parts from another similar power supply on ebay. At first the machine didn't power up properly even though the supply voltages were all good on a volt meter when tested befor
Electronics Forum | Sun Nov 27 16:53:39 EST 2016 | ttheis
Our UP500 has been running great for a few months then the AC/DC 5/12/24V power supply stopped working and the PC could not communicate with the cage. The PC screen also got very noisy. We replaced the power supply with a used replacement and the ma
Electronics Forum | Wed Nov 30 20:43:06 EST 2016 | ttheis
OK, so went to power up again today and had the same kind of issues. The 24V and 5V lights on the cage flicker dimly about every 500ms. I tried my trick of disconnecting the +24v lead to the lift table amp and it acted the same, so it didn't work th
Electronics Forum | Thu Dec 01 13:35:21 EST 2016 | ttheis
I decided to replace the psu with three din supplies since it was a repeatable issue with the 5v rail. Machine is back in operation now with no signs of problems.
Electronics Forum | Wed Feb 07 08:41:10 EST 2001 | dliechti
I have to design a power supply which converts 220V AC into 5V smothed DC. It has to be very small, so it shouldn't have a big transformer. Has somebody a scheme of a circuit? Thanks
Electronics Forum | Tue Oct 02 18:01:17 EDT 2018 | bnorton
The 46054001 power supply seems to have failed. Is there a published procedure for how to replace this? Hopefully one not involving disconnecting all the Dsub connectors and wrecking my body reaching it?
Electronics Forum | Thu Jul 15 15:37:04 EDT 1999 | David
| i have worked with the universal gsm in the past and am now helping out a contracting company who is setting up one in their facility. My question is: the power requirments for the machine calls for 3-phase 230V, does it really need 230V or is the
Electronics Forum | Wed Nov 01 23:59:23 EDT 2017 | lkdhde1
F5HM power supply unit 00375503-02,consion document which I have is not suitable since this is new power supply unit, want to find out suitable document
Electronics Forum | Wed Jul 14 12:03:53 EDT 1999 | greg c.
i have worked with the universal gsm in the past and am now helping out a contracting company who is setting up one in their facility. My question is: the power requirments for the machine calls for 3-phase 230V, does it really need 230V or is the s
Electronics Forum | Wed Jul 14 15:06:33 EDT 1999 | M Cox
| i have worked with the universal gsm in the past and am now helping out a contracting company who is setting up one in their facility. My question is: the power requirments for the machine calls for 3-phase 230V, does it really need 230V or is the