Electronics Forum | Fri Feb 28 02:25:44 EST 2020 | midast
We have all spare parts for the DIMA (Nordsson) Dymaxion after our machine went for recycling. It was no problem with the machin. The problem was lack of support According to Aston it should only be one still running :) (I guess they mean in Europe)
Electronics Forum | Fri Mar 24 13:06:23 EST 2006 | wbartley
First off yes you can still get Comtra belt feeders. Second what type of belt feeder and for what kind of machine? eg Juki
Electronics Forum | Sat Mar 25 16:36:44 EST 2006 | Frank
Comtra doesn't usually sell directly to the end user. Try consulting your machine manufacturer. On the mechanical belt feeders there are no adjustment. On the electrical feeders there is a turn switch to select the feeding travel of the belt. T
Electronics Forum | Thu Mar 08 06:45:30 EST 2001 | genglish
I am having a problem with a Universal GSM machine (Platform Tray Feeder)dumping trays with parts still in the trays, subsequently damaging the leads. Is it possible to program the machine so if any part is not picked from the tray in the matrices a
Electronics Forum | Wed Aug 20 08:05:06 EDT 2008 | pjc
They are faster today, but still not up to fixed-pin machine speeds. They tend to be 7x to 10x slower. Any of the machine suppliers can run a test evaluation and give you a report on test coverage and test times. There are techniques to make them fas
Electronics Forum | Fri Apr 05 21:52:31 EDT 2024 | poly
I'm looking at some used AOI machines. There's a lot of yestech machines that are cheap and pretty new, less than 5 years old. My worry is the brand doesn't seem to exist any more. Can you still get parts for these? Is the 3D stuff good with the
Electronics Forum | Thu Mar 08 09:08:47 EST 2001 | jax
Your safest bet is to manually remove the trays. The problem with what you want is that the machine does not know that it missed a part. It simply goes to the point you specify and tries to pick somthing up; if it doesn't pick up anything it believes
Electronics Forum | Thu Mar 08 16:00:03 EST 2001 | gsmguru
Enter A value of -1 in the Tray pickup X & Tray pickup Y fields. This will disable the automatic empty tray pickup by the machine. I would recommend getting a data sheet on the tray from the component vendor for accurate pocket & tray dimensions. Var
Electronics Forum | Fri Aug 08 11:37:09 EDT 2008 | pjc
Yes, sure. In fact in some applications ICT is coming back. Mainly due to the fact that more and more SMT discrete components have no markings, so AOI cannot tell you if you have the correct value on the PCB. Fixed pin or flying probe ICT is a valuab
Electronics Forum | Wed Feb 14 15:34:37 EST 2018 | cbart
We have two Wave Solder machines and still use > the FOAMING flux, but the formula we used to use > was discontinued, and the one we are currently > using isn't as good. > > I'm hoping that others > are still foaming and will share what flux >
.gif)
