Electronics Forum | Tue Apr 25 20:22:32 EDT 2023 | ttheis
We have a line running GSM1 machines and we are considering upgrading to GX-11S machines with FJ3 heads. Does anyone know if the GX-11S machines can take pneumatic feeders from the GSM machines? We have a very large inventory of the pneumatic and ele
Electronics Forum | Wed Apr 26 01:59:01 EDT 2023 | ttheis
Thanks, what about the camera calibration? Does it use the same kit as the GSM machines?
Electronics Forum | Wed May 03 13:35:00 EDT 2023 | ttheis
Thanks, Deni! We're replacing two 4-spindle GSM's with two GX-11S with Flex3 front and IL4 in the rear. These we plan to use a mix of our pneumatic & 24V feeders as well as high speed feeders as we acquire them. The sellers advised that the 24V kits
Electronics Forum | Sun Mar 13 13:08:14 EDT 2022 | poly
Pick and place machines have been ordered. UIC Genesis GC30 and Genesis GX11 with PTF. Hopefully they work well! Not sure if there are any other universal machines in Australia...
Electronics Forum | Tue Apr 25 22:17:39 EDT 2023 | poly
I think they can all support pneumatic but it might depends on the age, I'm not sure about series 2 Genesis. Something to watch is that they can't all support 24 V Electric feeders. Mine does but it's an option. 48v is the standard for gold feeders
Electronics Forum | Sun Apr 30 20:52:33 EDT 2023 | poly
I've got access to all the manuals. Alas my 7 spindle head (flexjet 3 on a gx11s) detects collisions when picking even when no nozzle is in the spindles and they aren't near anything. My other machine is working well.
Electronics Forum | Wed May 03 13:27:32 EDT 2023 | dilogic
Genesis should work with pneumatic feeders, but not if Lightning heads are used. It's basically 24V transformer and some wires and fuses - you can do this "upgrade" by yourself, actually. Regarding cal. kit - it's the same as for GSM's but, again, no
Electronics Forum | Wed May 10 17:57:36 EDT 2023 | leviwhite
Bevor ich mit dem Spielen anfangen, komme ich wieder zu einem Beitrag, in dem die neuesten Nachrichten über die Casinowelt vorgestellt sind. Das hilft mir, richtige Entscheidung zu treffen.
Electronics Forum | Tue Sep 06 01:32:25 EDT 2022 | poly
I've got two Genesis machines (GC30 and GX11) that I bought used. The PWC on one is disabled, and if I enable that axis the machine will tell me it can't find or initialise that axis. I tried swapping the board 48904905 from the working machine to th
Electronics Forum | Wed Mar 20 12:28:40 EDT 2024 | poly
The Fuzion HC will do that many parts depending on the tape width. 8mm is dual per lane, big ones can take up a lot of lanes. Our boards have that many parts and I use two machines (gx11 and a gc30). I think the Panasonic is probably a better option
