Electronics Forum | Wed Sep 10 17:16:57 EDT 2008 | gregoryyork
does that mean your buying me half a pizza then Vlad
Electronics Forum | Wed Feb 02 14:09:25 EST 2005 | Chunks
Colored paint pens by Abbeon are inexpensive and cannot be removed with things such as flux-off. They have a ton of colors and all it takes is half a second to touch each board. Remember, this will NOT eliminate or solve your defect problems(like m
Electronics Forum | Mon Jan 18 11:42:06 EST 2010 | tech1
Shit, I know where to get a half a dozen of these dinosaurs. I need to call these guys 30k??? Right
Electronics Forum | Sun May 05 06:53:25 EDT 2024 | kirill
No idea. Do you have a picture where the mirror located on the head? I've been using them for almost half a year, no issues so far.
Electronics Forum | Fri Jan 15 08:43:43 EST 1999 | Mike McM
Bernie, If the pads are for a chip component and only about a half a pad off without anything else in the misregistered area, go ahead and use the stencil as is. Surface tension of the solder at liquidus should cause it to wick back to the pad, even
Electronics Forum | Wed Sep 22 19:17:14 EDT 2004 | KEN
hand held tachometer. Standard method for process speed verification. Quick, easy and no more tape measures and stop watches! Check your local grainger. They probably have half a dozen makers. I recently bought a dual tach. One end has the roll
Electronics Forum | Mon Apr 11 08:39:41 EDT 2005 | Grant
Hi, Yes, it's going to be hard. I was thinking a high end fine pitch placer could place the fine pitch accurately, and then slowly do the passives. That might do the trick, but unless he's prepared to spend at least half a million, it's going to jus
Electronics Forum | Thu Dec 22 07:46:04 EST 2005 | grantp
Hi, We are using well over half a million a month, so it's not as much as the bug guys, but we really need them from the manufacture direct. I think we have found some, and wow can you get a lot of passives on a 13 inch reel! Regards, Grant
Electronics Forum | Sat Nov 21 09:13:57 EST 2009 | patrickbruneel
In addition to Dave’s response Yes tin dissolves (corrodes) other metals even at room temperature, just a whole lot slower. The affinity of tin to dissolve other metals is most effectively neutralized with the addition of lead. It is not by accident
Electronics Forum | Wed Mar 02 08:58:48 EST 2016 | mbass
From what I can rememeber I used to set x & y to zero advance the tap ethen it was press the lane and vaild button together to advance half a pitch which should bring it all into line. All the older RC software you could just put a manual adjustment
