Electronics Forum | Thu Jan 02 04:56:38 EST 2014 | bobpan
Here is a couple of things to look at: 1. Make sure the boards are plugged into the correct position. Also just leave out the transport card to see if its hanging up the machine. The transport board should be the board all the way to the right. 2. M
Electronics Forum | Fri Jan 03 15:16:54 EST 2014 | ppminc
If all of the lights are on, on the operator interface panel usually that means the EPCU is defective or not fully seated correctly. If you swapped out the EPCU board from another machine you need to make sure its the same type of machine. If it has
Electronics Forum | Mon Dec 30 21:38:56 EST 2013 | jkoughan
I've got a scary one for you guys and desperately need your help - We just purchased a second Quad 4C and had some communication problems when we first turned it on (we're still working on that issue). To chase down the problem, we decided to start
Electronics Forum | Mon Jul 07 14:44:59 EDT 2008 | c111
I have a wall of shame in my office. If someone does something stupid that damages equipment or parts I hang them on the wall to Embarrass them for their entire employment. sounds like you should hang these pictures on your oven to remind people what
Electronics Forum | Fri Sep 17 06:34:53 EDT 1999 | Bach Huss
Hi All, I am running 19 Siemens S20 Machine here. I found out that the Siemens Machine once a while hangs. The remedy is reboot the machine. I wonder what is the machine hang rate for other S20 machine else where. Can anyone give me any suggestion
Electronics Forum | Fri Sep 17 09:25:12 EDT 1999 | Eyal Dickerman
| Hi All, | | I am running 19 Siemens S20 Machine here. I found out that the Siemens Machine once a while hangs. The remedy is reboot the machine. I wonder what is the machine hang rate for other S20 machine else where. | | Can anyone give me any s
Electronics Forum | Sat Sep 18 02:57:09 EDT 1999 | bach huss
| | Hi All, | | | | I am running 19 Siemens S20 Machine here. I found out that the Siemens Machine once a while hangs. The remedy is reboot the machine. I wonder what is the machine hang rate for other S20 machine else where. | | | | Can anyone giv
Electronics Forum | Sat Jun 23 09:56:04 EDT 2007 | slthomas
Every plant I've worked at used copper. I don't know your criteria for better, but I would think soldering and hanging copper would be a lot easier/quicker than threading and hanging iron. I haven't priced either one, though.
Electronics Forum | Wed Aug 26 11:17:58 EDT 2009 | thanh
machine boot up all the way till START MACHINE, READY FOR ORIGIN. And just hang right there. Any one know what wrong with it. I did re-load VG software, but did the same thing.
Electronics Forum | Fri Sep 17 11:03:46 EDT 1999 | Scott S. Snider
| Hi All, | | I am running 19 Siemens S20 Machine here. I found out that the Siemens Machine once a while hangs. The remedy is reboot the machine. I wonder what is the machine hang rate for other S20 machine else where. | | Can anyone give me any s
