Electronics Forum | Mon Mar 24 15:20:15 EDT 2014 | kojotssss
Hello for all People's .I have a question. I have a problems with backup pin placement.When x/y robot tried to set up pins: we got a problem- X=-0.200 and y=-0.880 To my mind ther are a problem with air cylinder and axis.Any solutions?! can you c
Electronics Forum | Thu Aug 25 09:56:39 EDT 2005 | cyber_wolf
Can anyone tell me what he overall height of a CP6 board support/backup pin is supposed to be? They don't sell the back up pins as an assembly. It looks like you have to buy them piece by piece and set the height yourself. Thanks
Electronics Forum | Thu Aug 25 14:41:06 EDT 2005 | jdengler
The height varies with board thickness. The top of the board is always held at the same height so as the board thickness increases the pin height decreases. Jerry
Electronics Forum | Thu Aug 25 11:15:16 EDT 2005 | dougs
do you mean the board support pins? generally anytime i've set these up i've just set the height as i've went, i put the pin under the board, with the board clamped, and move it up until it touches the board and set it there. you just need to make
Electronics Forum | Sun Mar 08 09:45:35 EDT 2020 | richardcargill
Blimey, You've done well ! apart from the monthly clean/regrease/calibrate placement we clean the cameras periodically ( build up of dust over time on the lens ), There may also be some air intake filters that will occasionally need a clean, but we
Electronics Forum | Fri Aug 25 04:43:58 EDT 2017 | praveenmuthusamy
Thank you so much for your valuable feedback . Root cause was found that amount of solder paste printed on board is uneven. Uneven solder paste printing was Due to misalign of backup support pins in PRINTER. Problem was rectified after changing backu
Electronics Forum | Fri Mar 11 10:51:29 EST 2005 | mfoster
Samsung Back-up pins available from Dynatech for $30 each. http://www.DynatechSMT.com
Electronics Forum | Fri Apr 17 13:55:33 EDT 2009 | grantp
Hi, If you don't have a space constraint, why not check out the XPF machine. We just got the second XPF-W machine in the world to ship, and it's amazing. Huge boards, and the same feeders as NXT. Auto backup pin, feeder change on the front of the ma
Electronics Forum | Tue Apr 28 19:43:25 EDT 1998 | Michael Allen
I'd like to find a buyer for the following used equipment: Make: Universal Instruments Model: 4713D Adhesive Dispenser Options: Rotatable dual-dot head (0deg, 90deg) Price: Asking $4K (No reasonable offer refused) I should note that this d
Electronics Forum | Tue Mar 20 08:04:47 EDT 2018 | spoiltforchoice
Those of us doing low volume with mesh ovens and double sided boards will often use the titanium strips used for making boards more rigid for wave soldering. Gives you enough clearance for lower profile items that you would typically find on the firs
