Electronics Forum | Sat Oct 18 22:41:54 EDT 2014 | pfifla1
Can't help you with the manual but do have some > tips: If it was shipped, it's possible someone > tied axis or blocked stuff for shipping. Look > for that. Look for bent sensor flags + go into > I/O and check to see all sensors you can find a
Electronics Forum | Mon Oct 20 14:45:04 EDT 2008 | altonc
Does anyone know how to open this program without hardware key or any software can convert VIOS text to VIOS file for Philips X series
Electronics Forum | Sun Jul 12 12:41:53 EDT 2009 | emanuel
Anyone can tell where is it possible to download the installation of the Gemline PPS? I copied the directory from the previous machine's owner, the software starts but any attempt to move to one of the menus results in an error message about a hardw
Electronics Forum | Thu Aug 02 16:47:37 EDT 2018 | erici
Thanks for all your help guys. The problem ended up with the parallel port where the hardware key(dongle) was attached. The cabling from the pc to the parallel port at the back of the machine was defective. Cheers
Electronics Forum | Tue Jul 31 17:24:33 EDT 2018 | erici
There is a hardware dongle at the back of the machine. Is this the hardware link (key) you are referring to? Ok i will check the cables to PCIB40#3. Thanks again
Electronics Forum | Mon Jun 12 09:49:46 EDT 2000 | Mark Charlton
Miguel, Ask your Philips salesman or local representative for a copy of the VIOS software configured to run on a stand-alone PC AND a hardware key. With this software, you are basically programming your machine at your desk as long as you have CAD
Electronics Forum | Mon Jul 30 17:31:59 EDT 2018 | dekhead
That error message is keyed by a hardware (soldered) link on the backplane board of the Y1 (motor controls), through direct cable to PCIB40#3... check connections both ehds; possibility of multiple PCIB failures?
Electronics Forum | Tue Jul 31 22:32:35 EDT 2018 | dekhead
Hardware dongle on back of machine is software key which may or may not be required for your software (depends on software version) and has nothing to do with the error you are experiencing. The hardware link to which I refer is on the Y1 backplane
Electronics Forum | Tue May 18 07:33:17 EDT 2004 | cyber_wolf
I need to find a way to keep all of the essential hand tools and hardware at our screen printers and placement machines.(Allen keys,allen screws) I have tried labeling small toolboxes and putting the tools and screws in there, but they ALWAYS seem to
Electronics Forum | Wed Aug 15 16:57:42 EDT 2001 | jfure
Hi; I see that most threads are related to professional activities, this question is related to my new hobby. I am putting together an audio amplifier based on a national SMT IC (LM3886, TO-220 11 pin package) with pin pitch of 1.702mm. How can I f
