Electronics Forum | Wed Jun 28 09:24:13 EDT 2006 | jax
1. What part of the time is spent Creating Visual Aids? Unless you are digitizing the gerber files for everything, why would you have to modify/re-label the referance designator info? (Part#-Ref.ID is color coded) If you are digitizing th
Electronics Forum | Fri May 08 06:11:12 EDT 2020 | bukas
what is the error code you get?
Electronics Forum | Sat Oct 18 22:41:54 EDT 2014 | pfifla1
Can't help you with the manual but do have some > tips: If it was shipped, it's possible someone > tied axis or blocked stuff for shipping. Look > for that. Look for bent sensor flags + go into > I/O and check to see all sensors you can find a
Electronics Forum | Tue Jul 31 17:24:33 EDT 2018 | erici
There is a hardware dongle at the back of the machine. Is this the hardware link (key) you are referring to? Ok i will check the cables to PCIB40#3. Thanks again
Electronics Forum | Tue Jul 31 22:32:35 EDT 2018 | dekhead
Hardware dongle on back of machine is software key which may or may not be required for your software (depends on software version) and has nothing to do with the error you are experiencing. The hardware link to which I refer is on the Y1 backplane
Electronics Forum | Mon Oct 20 14:45:04 EDT 2008 | altonc
Does anyone know how to open this program without hardware key or any software can convert VIOS text to VIOS file for Philips X series
Electronics Forum | Sun Jul 12 12:41:53 EDT 2009 | emanuel
Anyone can tell where is it possible to download the installation of the Gemline PPS? I copied the directory from the previous machine's owner, the software starts but any attempt to move to one of the menus results in an error message about a hardw
Electronics Forum | Mon Jul 30 17:31:59 EDT 2018 | dekhead
That error message is keyed by a hardware (soldered) link on the backplane board of the Y1 (motor controls), through direct cable to PCIB40#3... check connections both ehds; possibility of multiple PCIB failures?
Electronics Forum | Thu Aug 02 16:47:37 EDT 2018 | erici
Thanks for all your help guys. The problem ended up with the parallel port where the hardware key(dongle) was attached. The cabling from the pc to the parallel port at the back of the machine was defective. Cheers
Electronics Forum | Tue Jul 15 17:30:38 EDT 2003 | ServGuy
00c is a hardware interuption Addr F92228A0 is out of the card rack, meaning probably the CPU or memory PCB is out of control. Swap the 1st and or last card in the card rack with another machine or from spares.
