Electronics Forum | Fri Apr 01 08:33:28 EST 2005 | tds
Please call me John & Michael. I am the Sales Representative in Ohio and I can help you both with each question you have regarding Technical Devices. My phone number is 330-724-3333 Thank you. Scott Wilson Tritec Sales, Inc.
Electronics Forum | Mon Apr 04 18:23:35 EDT 2005 | GS
Solder volumes is very important parameter to keep under control in order to get a good and reliable CCGA solder joint, and an automatic 3D paste volume inspection is strongly recommended practice to use. Questions: - what Column pitch do your CCGA h
Electronics Forum | Mon Apr 04 09:35:16 EDT 2005 | russ
What are the max temp specs for each of the components? this sounds like the real problem with lead free conversion. Which parts are which? Currently we are getting ready to reball lead free BGAs back to lead for a customer that had to be lead free
Electronics Forum | Wed Apr 06 09:16:31 EDT 2005 | blueflag
Ive just checked all the cables that i can see and there seems to be nothing wrong. Have just put a brand new fuse in to mot z card and it has blown it. machine boots up, initiate the hardware and everything goes ok until it does the z height then i
Electronics Forum | Wed Apr 06 12:25:47 EDT 2005 | Rob.
Hi Russ, Thanks for that. The oven was being recommended to a customer of ours who is a subby, so will have to handle many different types of boards & components. I was thinking this wasn't too great an idea but thought I'd go for a second opinion
Electronics Forum | Wed Apr 06 05:55:27 EDT 2005 | blueflag
At a previous company i worked at we had a quality inspector who had similar problems and it turned out that they were allergic to the nickel in the gold finish maybe it could be something similar but as the others have said, a dermatologist is the p
Electronics Forum | Wed Apr 06 21:37:35 EDT 2005 | KEN
Are you saying you have solder balls (as in solder paste balls) at the lead tips (or land tip)? This means your thermal profile is not hot enough. why the sudden cahnge? I will bet the lead frame material was copper and is now alloy 42. sounds like
Electronics Forum | Wed Apr 13 21:04:39 EDT 2005 | pdeuel
We have a controlled pressure facility. When the pressure is set at 0.2 lbs above outside our security doors that open outward do not close by themselvs causing alarms. Our facility remains dusty under and on equipment because of conditions listed on
Electronics Forum | Mon Apr 11 02:58:49 EDT 2005 | Base
You might want to take a look at some of the Assembl�on/Yamaha stuff. I believe they have a machine that has a couple of dispense heads and a couple of placement heads, so you can get your solder-paste and component-placement all done in one machine.
Electronics Forum | Thu Apr 07 10:39:36 EDT 2005 | geb
I have a BTU International VIP98 reflow oven, running WINCON Version 2.00C on Windows 98. The light tower only lights green when the oven reaches temperature, and the other colours never light up. Do you know how to set the other colour lights to tu