Electronics Forum | Thu Apr 17 13:30:30 EDT 2014 | anvil1021
in our opinion unless the Nikon machine has a solution to the Xplane ability to use Tomosynthesis there is a huge difference in the 2 machines. Xplane is a huge quality enabler and we have people beating our door down to get us to look at their perce
Electronics Forum | Mon Apr 07 11:53:44 EDT 2014 | hegemon
It's right there in front of you. Not enough overall temperature across the board. No wetting issue is evident, just looks like you need to turn up the heat, as Dave has mentioned. SOB has mentioned the issues surrounding the Electrolytic caps, ch
Electronics Forum | Thu Apr 10 04:52:18 EDT 2014 | eoghan
Update... I have gotten the screen to function, but the router does not go beyond the boot screen. The IT guy here tells me it is a hard drive failure and that will need to be replaced. The data on the hard-drive is non retrievable. Does anybody kn
Electronics Forum | Wed Apr 09 03:32:49 EDT 2014 | sarason
Place a Digital CRO on that 24V rail. Watch the output. trigger on voltage drop lets say 18V picking a figure out of the air. You may well have another rail in your supply or nearby pulling your 240V //110V rail. Most likely a shot Electro either on
Electronics Forum | Fri Apr 11 12:42:29 EDT 2014 | emeto
Hello all, does any body place PoP parts? We are running them through a regular process(paste place reflow) and we don't have good rates on these. Mostly we observe opens at the sides of the part. We are thinking to purchase a flux feeder, but I wan
Electronics Forum | Mon Apr 28 16:17:35 EDT 2014 | markhoch
I donno Jimmy, I may have to side with Hedge here... As he mentioned, in a pinch, it's okay, but as a usual practice, its not acceptable. If your employer is sending you out to do machine installs without tools, or the means to get yourself around,
Electronics Forum | Thu May 01 07:39:21 EDT 2014 | pfifla1
Frazzled - It's not just you. Regardless of the price the machine is when a service engineer comes to your place they should have 95% of the tools needed. now a 24" crescent wrench might be hard to tote around but all the standard tools should be wit
Electronics Forum | Thu May 01 23:32:46 EDT 2014 | asajedi
I have assembled panels of 24"X9.5" LED Panels (24 strips of 10mm). I need to cut them into strips and join them together then add double sided 3M tape and spool them. How is this best accomplished. Laser Cutting, Die Cutting, Roller Cutting
Electronics Forum | Tue May 06 21:24:28 EDT 2014 | davef
Most ceramic you'll see comes from Coors or Kyocera. Size of your substrate will vary according to the stencil / component that you're using. 3" by 3" should be sufficient for most applications. If you get them too small, you could have handling is
Electronics Forum | Thu May 08 18:21:13 EDT 2014 | jorge_quijano
Hola, We are about to start building a new PCBA using a LGA, we have not used such components in the past, is there any recomendations you can provide me? I've found some articles saying that stencil thickness is the key, what is your experince usin
.gif)
winsouce.jpg)