Electronics Forum | Fri Jan 23 02:01:33 EST 2015 | dilogic
If someone has printer from subject, I have some questions regarding squeege holders (dimensions). I bought used one without squeege holders, found a company that can make it but I do not know exact fixing screw positions and height.
Electronics Forum | Fri Jan 30 06:14:01 EST 2015 | philc
And there is always the argument of "get in and out quick", which is possible with high tip temps. I prefer to use a really hot iron, and do it quickly, rather than a lower temps and keep the tipi on the bit till it melts the solder. If you have a P
Electronics Forum | Thu Jan 29 15:28:53 EST 2015 | jpal
Do any of you use your AOI machines to inspect do-not-install locations? Do you look for solder bridges or stray parts in those spots? Everything I have learned and heard involves part placement and solder quality. But is it worth going that extra le
Electronics Forum | Mon Feb 16 09:42:19 EST 2015 | max83
Hello. I saw your site and did not found info about DCT cleaner machine. I need spare parts for DCT inJet 676 CRD machine. p/n 230370029 (meltblowned PP-20micro) p/n 230370021 (meltblowned PP-10micro) Do you have? Best regards Max
Electronics Forum | Sun Feb 08 18:52:10 EST 2015 | asozio
Sarason, Thanks for the information. I will look into your program, but it appears to be similar to one I have produced myself. I can convert between the CAD and loading reasonably well for our RH2/RH6, but cannot communicate with them online to sen
Electronics Forum | Fri Feb 13 10:10:21 EST 2015 | rgduval
I'm with Evtimov...if you've got a new assembly with a BGA (and especially if BGAs aren't an every day occurrence in your process) it should definitely be profiled. I have run BGA boards without profiling before, and got lucky...but, I wouldn't reco
Electronics Forum | Thu Feb 12 21:14:37 EST 2015 | kahrpr
They are both very good machines however Kohyoung will give you better first pass results meaning a lot less false calls and when you run the first board after initial programming you have to fix very few things. However the cost is a lot more. This
Electronics Forum | Fri Feb 13 12:00:21 EST 2015 | placementguy
I have extensive experience with both..I could share a list of 10 major differences, based on your manufacturing environment and the products you make, if you would like. It really matters whether you are high volume, low mix or low-med. volume, high
Electronics Forum | Wed Feb 18 10:36:44 EST 2015 | superlen
Hello, We are bringing online a UP2000 printer and are in need of some squeegees. Can anyone recommend a supplier? This is a used machine so I'm not sure if I would have to register with Speedline if I wanted to order parts from them. I just assumed
Electronics Forum | Mon Feb 23 14:58:01 EST 2015 | ercdave1
I found the solution to my problem. Since I don't have a manual for the machine. I had no idea how to change the system settings but by pressing the first 2 buttons on the left of the front panel I got the system settings menu and was able to change
