Electronics Forum | Wed Jul 29 10:27:01 EDT 2015 | risorse_new
Goodmornin I have a problem with the fixing and move cameras, i don't see the image of the cameras on the screen. On the monitor i see the cross and letter, but i can no see on the black box the camera images. I know the problem is on the ADDA Board.
Electronics Forum | Sat Aug 01 02:30:23 EDT 2015 | sarason
You could take a piece of aircraft grade aluminium, and machine you own. the advantage is you can set it up so you don't have to do any height compensation when you swap between a normal board, and your custom assembly sarason
Electronics Forum | Sat Aug 01 03:52:54 EDT 2015 | mikekeens
I have had some custom support jigs made but as i'm working for a contract electronics manufacturer there are so many different PCB assemblies to be made - storage of the different jigs and the changeover time is the problem. The support system ne
Electronics Forum | Thu Jul 30 08:46:12 EDT 2015 | hemantp
We are having X-Ray Machine X TEK HMXST-160 The machine is working fine with respect to Interlocking , X-ray on , but not able to zoom and move the Joystick positions ,it is stand only in one position while starting the application we are getting
Electronics Forum | Thu Jul 30 16:50:41 EDT 2015 | lokit
In our production line we use the pick and placer My100 by Mycronics. We get a lot of feedback from quality department about IC's being placed upside down, wrong polarity. (Wrong polarity usually already delivered to us, or IC's placed in the sticks
Electronics Forum | Wed Aug 12 11:01:37 EDT 2015 | bnorton
Machine->Config and set all their addresses to 0. We have swapped the EPC5, the VGA Video, the Force board, and most recently the Lantern 630VME. Watching the Force board COMM2 with Logicomm, at the end of all the ldx file processing it changes to c
Electronics Forum | Tue Aug 11 03:27:10 EDT 2015 | iamera
Hello, I am new in this forum and also new in PCB manufacturing. now we have issued about silver open and short. we can detect this defect after auto check process and its to late to save our PCB. Is there any way to detect silver open or insufficien
Electronics Forum | Thu Aug 13 00:18:28 EDT 2015 | Banana
hi, currently we have Fuji CP8 and XP242 machine for pick and place. as now, most of the customers are going for the 0201 components, so i would like to know does the CP8 has the capability to mount 0201. because, i had run 1 model that has 0201 part
Electronics Forum | Fri Aug 14 10:02:23 EDT 2015 | swiese242
Yes your CP8 should place these flawlessly. I would calibrate the machine and check your nozzles. We have some CP7's and they rock. We use a .4 nozzle for the 0201's with no problem. Always check your program, feeder, nozzles, and nozzle check before
Electronics Forum | Thu Sep 10 17:13:31 EDT 2015 | tombstonesmt
There are factors that manufacturers have taken into consideration when dealing with coating. On/off times, dispense speeds, heights, etc.. Dedicated software with tools to easily map out paths are a godsend. We made our own coating machine with a s