Electronics Forum | Fri Sep 22 07:35:37 EDT 2000 | Henrik Eklund
Hello everyone out there, I have been working in the SMT process for a couple o years now, and now I'm partly responsible for the turret head component mounting process. We are about to buy new equipment and I want to do a capability study of this m
Electronics Forum | Fri Oct 13 19:01:46 EDT 2023 | crystalw4280
I have an old Juki 2060 The electors were replaced on some heads that were disabled. Now we are showing some of the same errors with those heads. Does anyone have any suggestions for possible cause that would make this happen again. Another warning
Electronics Forum | Tue Oct 24 19:09:12 EDT 2023 | sarason
Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare) sarason
Electronics Forum | Fri Mar 10 13:50:42 EST 2006 | Frank
Contact your local Juki distributor. But as a reseller of used equipment they may not be too willing to help out. And why would you want to add the expense and hassle of adding a glue head on a machine?
Electronics Forum | Sun Mar 12 12:29:26 EST 2006 | Edward P. Woldendorp
Frank, Thank you for your reply. A customer in Russia asked us for this glue head. He runs a PM-570L machine. What would you advise him? Thank you and best regards, Edward
Electronics Forum | Thu Aug 18 12:46:43 EDT 2011 | jdengler
In the center of the head shaft there is a rod that is used to flag 2 sensors at the top of the shaft. This lets the machine know when a nozzle is attached. Check that the sensors are working correctly and the rod moves freely. The sensors are fib
Electronics Forum | Fri Mar 10 03:45:11 EST 2006 | Edward P. Woldendorp
Dear All, Who can help find a glue head(glue dispenser) for the Zevatech PM570L machine? This glue head is mounted upon the machine. Thank you for your help. e.woldendorp@twentech.com
Electronics Forum | Mon Mar 29 22:01:48 EST 1999 | Scott Birnbaum
Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? How
Electronics Forum | Thu Jun 23 08:43:25 EDT 2005 | jax
The Lightning Head on an Advantis Platform is a good choice. You should expect to see "Real Life" speeds around 20K, better accuracy than any Turret Style Machine, and the software is the same as any GSM,Genesis,Advantis machine using a Windows platf
Electronics Forum | Thu Apr 01 14:22:12 EST 1999 | Jim Boudia
| Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? Ho
