Electronics Forum | Sat Mar 26 02:38:07 EDT 2011 | evans1001
Had an issue with spindle 2 not coming down and picking parts up, then it was but not placing the part. The other 3 spindles were working fine. Changed the head on the machine but stil had the same issues. Anyone with any ideas. Cheers
Electronics Forum | Tue Feb 12 10:51:46 EST 2002 | stefwitt
Dave is right. There is no machine on the market which can handle a 1.5 m long "board". If you or someone else will have to tinker with a custom made machine, it will be less expensive to use a used machine ( I could be offering some used Siemens mac
Electronics Forum | Tue Aug 25 16:35:36 EDT 2009 | drakealvarez
Universal G.S.M. single beam, head A1 (four spindle) -Aortiz
Electronics Forum | Fri Jan 17 04:07:12 EST 2003 | iman
A) Paste Printer : A1) identify the critical SMDs' pads. (choice should go to the BGA, CSP, MLF types...RES,CAP last in line...) A2) get a Paste measurement machine that measures readings of paste height (or better - volume) you are paste printing
Electronics Forum | Tue Mar 01 09:20:42 EST 2005 | rlackey
I remember Metro Nozzles mentioning that they are bringing out a new "blade" nozzle soon to allow closer density placement of 0402's & 0603's than the 08MPF allows. Also noticed that you get far better placement with a 1 mil camera than a 4 mil, coz
Electronics Forum | Wed Jun 27 11:58:42 EDT 2012 | cyber_wolf
Your tool tips are being damaged because the small x-motor is not engaging when the head is picking parts. When this happens the head overshoots and you bang the tips on the mag springs. Directly after a tip gets damaged go into the service program a
Electronics Forum | Mon Jul 30 15:28:25 EDT 2007 | gmoritz
I'm posting a diary of the major repair experience that we had this weekend. I'll follow up with a shorter post that sort of summarizes a few things. ------------------------------------------------ The service guys showed up at our facility about
Electronics Forum | Fri May 04 08:53:48 EDT 2007 | davem
I have been working with the UIC GSM platform for 6 years now in an EMS environment. Operating, programming, configuration, and line installation. I do not work for Universal or represent them in any way. UIC is a 1st rate company with excellent and
Electronics Forum | Wed Feb 27 14:07:25 EST 2002 | Stefan
In order to kiss off the components with an air blow, there are two times to consider: 1. reaction time of the solenoid ( to shut off the vacuum and turn on the air ), 5-10 ms 2. time required to fill up an air hose, which leads to the nozzle. Assumi
Electronics Forum | Wed Jun 16 16:54:13 EDT 2004 | Vince Cook
Greg, Just to cover the formalities, I work for Universal, and specifically with the GSM Platform. The GSM with a 4 spindle head can place 0201s, however, there are a number of things you'll want to have, chief among them a 1 mil/pixel upward lo
