Electronics Forum | Thu Feb 15 00:09:59 EST 2024 | erici
Does anybody know how to disable the RV head on a Siplace F5 machine. Our machine is configured with a 6-head RV head and an IC head. We are having problems with the RV head, and machine wont initialise without finishing the RV head reference run.
Electronics Forum | Tue Oct 21 04:45:13 EDT 2008 | stanyserrao
Head 1 is not placing the parts in production. Same component is placed by head 2. Head 1 camera is camera 12 type and head 2 camera is type 8. Machine re-set done resent proper data and interchanged cameara still same problem was foundd in head 1.
Electronics Forum | Tue Feb 18 14:37:41 EST 2020 | bk
What type of head do you have on your machine a midas head or a zi-fi head? Regardless of which you do have I would make sure that the head is clean where to tools go into the head. Use a soft swab or something similar so you do not damage the z forc
Electronics Forum | Wed Jun 27 12:27:46 EDT 2007 | jaimebc
Same error here with our GSM1. Does your GSM have 2 heads? If so, this is how I fixed it. I didn't have a spare Z motor, so I swapped the Z motor for the front head with the rear head. Problem gone. Now since we don't use the rear head as much as we
Electronics Forum | Fri Sep 23 08:27:28 EDT 2005 | siverts
The 7 spindle Flex jet head, can only pick max 7 comps. from the GSM base machine in a single operation, not from the shuttle. The Flex jet head is faster in z-axis and will also use the OTHC (On The Head Camera) to inspect most of Your smaller comps
Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Tue Mar 20 14:33:41 EDT 2007 | MEERAZ
JUKI 2000 MACHINES CAN PICK UP SIMULTANEOUSLY ONLY WITH 8MM FEEDERS (4 HEADS AT ONCE) 12 AND 16 CAN BE PICKED UP BY TWO HEADS (OR 3 HEADS KE-2060), HEAD SPACING ARE THE SAME AS 8MM FEEDERS
Electronics Forum | Tue Apr 30 02:57:56 EDT 2019 | reckless
In search of my ultimate chip shooter I need a machine faster than 2 universal instruments lightning heads. I am aware Fuji has a turret head and Yamaha. Are they as reliable/fast as the lightning head? Who else makes turret heads?
Electronics Forum | Fri May 21 14:15:54 EDT 2021 | oxygensmd
RVI-RVII calibration is not enough? In software (both machine configuration on this machine and in machine software you can change head setup). If you have the same head in this machine, all you need to do, head calibration.
Electronics Forum | Wed Sep 30 13:09:12 EDT 2015 | ercdave1
Hello Rob, I was able to get the machine to zero, apparently replacing the circuit board on head 2 conflicted with head one even matching the jumper settings to the old board. Once I marked the head as not mounted, head 1 zeroed. I re-checked the ju
