Electronics Forum | Thu Apr 28 17:02:07 EDT 2011 | grasso1976
Has anyone had success utilizing the lifted lead/ height checker feature on a Mirtec MV-7L. We recently had two separate events where the machine did not detect a lifted lead using the ic/bridge inspector. The soldering results came back with out def
Electronics Forum | Fri Aug 07 14:52:43 EDT 2020 | glasscake
Does anyone have a comprehensive manual or some pages on how to setup/how the laser height functions work on a Mirtec MV-7U? (Mirtec Inspector 4.5.6) Even a sentence describing what each input for these tools do would be amazing. I FINALLY was able
Electronics Forum | Tue Mar 13 12:54:58 EDT 2007 | hynergy
You required the process control equipments. 1) Paste Height Checker: To measure the solder paste thickness after printing. 2) Temperature Profiler: To measure the reflow oven temperature whether is within the control spec.
Electronics Forum | Wed Apr 23 11:28:11 EDT 2008 | jdengler
Did you ask Mirtec? When we were ready to buy a Mirtec they asked if we needed more than normal clearance height. I do not know if this would be retrofitable but maybe you could ask. Jerry
Electronics Forum | Wed Oct 25 12:38:05 EDT 2000 | Phil
Hi there!! You know what your QA is doing is right, coz by measuring the solder paste height can avoid the following defects: 1.Insufficient solder 2.Short solder or bridging 3.Solder balls SPC monitoring for paste height checking is required
Electronics Forum | Thu Mar 29 20:39:37 EST 2001 | peterson
AOI systems are a LONG way from being practical. You might impress potential customers (if you are a contract manufacturer) But they are basically an over-priced gimmick. Get your processes in line, buy a good 3D paste height checker, verify componen
Electronics Forum | Wed Apr 23 10:19:53 EDT 2008 | mikesewell
Has anyone tried to increase the working height on their Mirtec AOI. We have several MV-2HTL machines and have a few boards that are over 2" tall. I'd rather not leave the parts out and have a secondary step to install them after inspection. I've
Electronics Forum | Thu Apr 24 11:44:30 EDT 2008 | mikesewell
I was needing to go over 1.77" for a few assemblies.
Electronics Forum | Thu Apr 24 10:33:00 EDT 2008 | pjc
There is a field retrofit to increase the 25mm (0.98425") standard clearance up to 45mm (1.77165"), its not quite the 2", but close. You will have to recreate your component library though. For more details, contact Mirtec tech support at http://www.
Electronics Forum | Mon Jul 09 17:52:15 EDT 2012 | hegemon
I have used Mirtec MV-7 inline for post reflow solder inspection in the past, with Laser check for lead height (QFP) Very fast and great support. I have no connection, and receive no compensation from Mirtec. 'hege
winsouce.jpg)
