Electronics Forum: height sensor (Page 1 of 6)

Asymtek Millenium NSZ sensor

Electronics Forum | Tue Mar 07 21:57:54 EST 2017 | ttheis

It was indeed the fact that the height sensor needle was moved away from the dispense needle. Happened to find a height probe rod with longer reach in the spare parts shipped with the machine; with the height sense probe next to the needle the machin

Asymtek Millenium NSZ sensor

Electronics Forum | Sat Feb 25 12:01:28 EST 2017 | ttheis

I'm setting up a asymtek millenium m-cob style dispenser for the first time and running through the master offsets routine but when it attempts to find the needle in the nsz needle sensor it works in the x direction but when it attempts to locate in

Juki RS-1R laser height calibration?

Electronics Forum | Thu Sep 14 06:18:00 EDT 2023 | deniseburton

Hello, mcdvoice It seems like your Juki RS-1R machine's laser height calibration may be off. When measuring a 0402 resistor, it consistently reports heights around -0.60 to -0.70, causing pickup issues during production. Manually adjusting it to -

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Fri Jun 09 07:32:13 EDT 2017 | bukas

it sounds to me like a home sensor. try adjusting sensitivity if possible. move head manually to determine position at which home sensor is activated

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Thu Jan 24 09:09:46 EST 2019 | protokos

Hi Kathy i had the same issue yesterday and find that a spring is not ok. and i also clean the sensors this was fixing the problem for me.

Samsung CP40 Z height motor alarm detected Error Code 1523

Electronics Forum | Mon Jun 12 21:16:41 EDT 2017 | kahrpr

you can not just take the motor off and change it. the motors have a home pulse singnial. the motor has to be in a certian position the home pulse position when the flag hits the sensor. When you remove the motor you have to mark the motor gear when

Philips Topaz X change nozzle FNC

Electronics Forum | Wed Oct 31 13:50:00 EDT 2018 | xenkok555

Check optical head height sensors.

JUKI FlexSolder w620 questions

Electronics Forum | Fri Jun 24 04:51:38 EDT 2016 | unix60959

Hello, Does anyone know where I can find any information or documentation on the miniwave height sensor and control. I feel like the company I'm working for is possibly using the machine incorrectly in this regard. I assume, but would like to verify

Re: Glue dot question:

Electronics Forum | Thu Jun 29 12:36:10 EDT 2000 | Gary

You might try your search with the words Adhesive Dispenser. We recently evaluated machines from Asymtek, a Nordon company, Camalot, and Zmation, and GPD. There are several others. One consideration in the scenario you described is to make sure th

Temperature Probes for Reflow Profiling

Electronics Forum | Wed Jul 11 14:45:22 EDT 2007 | samir

ECD, KIC, or any mfgr. of thermal profiling devices will charge a premium for "simple stuff". For example, ECD charges a grand for their "flux-o-meter", which is just a PCB with a hole pattern, a pallet, and pH-sensitive paper. You can easily ma

  1 2 3 4 5 6 Next

height sensor searches for Companies, Equipment, Machines, Suppliers & Information

ISVI - Industrial Sensor Vision International Corporation
ISVI - Industrial Sensor Vision International Corporation

Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.

Manufacturer

3 Morse Road 2A
Oxford, CT USA

Phone: +1 203 592 8723