Electronics Forum | Wed Sep 07 03:03:35 EDT 2005 | Milroy
I am engaged with SMT production and we are going to have a brand new SMT line and I am studing about the screen printing and I have seen most commonly used stencil thickness is 6mil and I need to know what is the best solder paste height we can achi
Electronics Forum | Thu Sep 08 03:40:59 EDT 2005 | GS
do not forget also wich Type of paste used( granulometry) if Type-3 ? Type 4? etc, it could change in final metal on your pads/joints. Regards GS
Electronics Forum | Thu Sep 08 01:58:08 EDT 2005 | darby
0. Any less and you are scooping the paste from the aperture with the squeegee blades. I'm not saying that either of these situations is a good or a bad thing, it's just that if you buy a 6 mil stencil, you are trying to achieve 6 mil paste height.
Electronics Forum | Thu Aug 13 13:35:38 EDT 1998 | Mike Cox
| I am looking for information on any Gage R&R studies for the CyberOptics LSM solder paste inspection system. If you are a current user of one of these systems, are you finding any problems with the repeatability due to operator variation? What is
Electronics Forum | Tue May 23 02:41:37 EDT 2017 | zsoden
Thanks Bukas. I've actually gone to a lot of trouble over the past 24 months to completely clean, rebuild and adjust the pump and nozzle assemblies and even through all of that we've still never been able to get theoretical maximal wave height from t
Electronics Forum | Fri Nov 23 14:47:35 EST 2001 | kgroen
Some comments on the previous post: Be careful when looking at the proportion of SMT defects that are solder defects - you may very well find that only a small few of them originate at the screen printing step. As for specification limits for pas
Electronics Forum | Fri Nov 23 03:40:09 EST 2001 | ianchan
Hi All, agree 100% on product characteristics SPC, and do find process indicators such as paste Volume, useful to monitor via SPC, the printing process, as printing constitutes "70% cases of SMT defects". We juz purchased a 2nd hand CyberOptics 3D
Electronics Forum | Tue Jun 26 12:24:24 EDT 2001 | nifhail
Thanx for the reply Dave. We actually had a few thermocouples attached from underneath to see if there is any delta in temperature within the same BGA's ball. They looks OK, with the slope of 1 -2 Deg C,soak at 120 Deg C - 150 Deg C at about 90 sec,
Electronics Forum | Tue Aug 25 08:51:16 EDT 1998 | Justin Medernach
| | | Hi, | | | Does anyone has experiences in reflowing Ceramic BGA and found solder wicking ? Solder wicking has the syndrome that solder being wick from the pad and ended up in the leads. | | | We have rule out the possibility of not printing any
Electronics Forum | Mon Aug 24 21:04:58 EDT 1998 | Karlin
| | Hi, | | Does anyone has experiences in reflowing Ceramic BGA and found solder wicking ? Solder wicking has the syndrome that solder being wick from the pad and ended up in the leads. | | We have rule out the possibility of not printing any solder
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
