Electronics Forum | Fri Feb 25 16:16:01 EST 2005 | pjc
Here are some 5 zones models to look for: Electrovert OmniFlo5 Conceptronic HVA70 BTU VIP70 Vitronics SMR or XPM 520 Heller 1088 (4 zone)
Electronics Forum | Wed Feb 23 17:39:11 EST 2005 | Austinj
I am most familiar with Heller (10 yrs. of 1088 4 zone - 1800 8 zone ovens) and find them to be very reliable. Other Manufacturers may have five zone ovens on the used market. (I used Petlock as an example because you could get data sheets/specs from
Electronics Forum | Tue Feb 22 17:45:45 EST 2005 | Austinj
Heller 1500 Convection Reflow Ovens are a five zone upper/lower reflow oven. Petlock currently has two listed with specs and pictures. Here's a link for more info. NOTE: I do not work or have any affiliation with PETLOCK http://www.petlock.com/used
Electronics Forum | Wed Jan 14 08:03:50 EST 2004 | davef
Never heard of anyone doing this. What do the folk at Heller say? Heller Industries 4 Vreeland Road Florham Park, NJ 07932 Work: 973-377-6800 Fax: 973-377-3862 Other: www.hellerindustries.com Marc Peo at Heller is a frequent contributor here on S
Electronics Forum | Wed Nov 17 11:30:33 EST 1999 | Dave F
Greg: Heller 988s are good, solid, basic reflow machines that will turn paste liquid for 85-90% of all applications. I'm not sure what you mean by "is it comperable to the larger heller with a slower rate?" But, yes it will need to be run slower t
Electronics Forum | Thu Mar 21 16:45:31 EDT 2013 | dyoungquist
We have been using a Heller 1707EXL (7 zones + 1 cooldown zone) for lead free (ROHS) soldering since 2007 with good results. I wouldn't go any lower than 7 heat zones though. If I may brag a bit....The IPC-7095 revision C standard was released a fe
Electronics Forum | Wed Mar 20 16:21:54 EDT 2013 | woodsmt
I would reccomend at least a 8 zone system when doing RoHs. Most of the better systems (Vitronics, heller, BTU, ETC) built since 2006 should be able to run the higher temps for Pb Free. Should be a lot of them on the market world wide (used) with l
Electronics Forum | Sun Jul 21 10:33:53 EDT 2019 | reckless
I use a lead free 3 zone essemtec oven which I love. It's on the smaller side (wish it was even smaller). It works fine in our application. Maximum width is 300mm and only uses 5-6kwh average (25A max). Made in Switzerland. For some reason I don
Electronics Forum | Fri Apr 28 12:27:55 EDT 2006 | jdumont
Not to turn this into a used equipment war but I have a Heller 1088 4 zone i could sell for $4K in a month or so. We just got in a new BTU Pyramax98 and will soon have no use for the Heller....
Electronics Forum | Fri Sep 24 15:04:29 EDT 2021 | dwl
A few random thoughts: Nitrogen in reflow is mostly cosmetic, to get shiny joints on lead free. If you are getting good results without nitrogen now, there's no need to add it on your new line. Since power consumption is important, I would get spec
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
winsouce.jpg)
