Electronics Forum | Thu Jul 23 13:44:50 EDT 2020 | dwl
I used to have the same issue with reed switches on one product we ran. Same oven too. We ended up rigging up an "umbrella" with two titanium stiffeners and bare PCB as the roof. It was hokey but it worked.
Electronics Forum | Mon Jul 27 20:26:44 EDT 2020 | kghadiya
Good idea DWL, "Umbrella" thing works to solve this problem temporarily. But do you think it will cause any damage to hitter or heat zone?
Electronics Forum | Thu Jul 23 13:23:45 EDT 2020 | bmalhi
Small components blown issue could be due to one of the below. - Process issue; Make sure solder paste is fresh, if flux is drying out it will not hold parts properly. Check downward pressure of Pick Place. SOT may have to be pushed a little harder i
Electronics Forum | Tue Sep 15 21:05:37 EDT 2020 | bmalhi
Please try to run wakeup recipe and heat up one zone at a time to see if its related to any zone or load on the facility side. Please contact Heller ServiceNJ@hellerindustries.com to get help with the issue.
Electronics Forum | Tue Sep 15 14:42:20 EDT 2020 | kumarb
Some threads that may help: https://electronics.stackexchange.com/questions/398199/filter-harmonics-in-ac-power-line still recommend that you contact Heller for advice. Consider to insert a UPS system between your hydro and one of the LED light fi
Electronics Forum | Mon Sep 14 20:19:33 EDT 2020 | kumarb
Hi. 1) recommend to phone up Heller for assistance on this case 2) using the wakeup profile, can you confirm if the problem remains or not when you skip the warm up of zone # 2? 3) each zone is based on 2 heaters (this is what we have on our 1809e
Electronics Forum | Thu Sep 17 13:26:45 EDT 2020 | emeto
New factory - old oven. Something is different in power in the new place. Compare with old place and fix.
Electronics Forum | Sat Sep 12 04:19:28 EDT 2020 | SMTA-64387098
I have just built a new factory and installed the old Heller 1707 XL oven. When I run the oven the LED panel lights and downlights in the entire building begin to shimmer after 2nd zone is switched on. It does not get worse when the whole 7 zones are
Electronics Forum | Tue Sep 15 01:16:32 EDT 2020 | kylehunter
We have the same issue. It was present with our old 1500 and is even more present with our newer 1800EXL. For us, it seems to be related to the blowers, not the heaters. If we are in cooldown or wakeup the issue is still there with the heaters off.
Electronics Forum | Mon Sep 14 21:31:33 EDT 2020 | dwl
Does the flickering go away once the oven reaches its set temperature? It will draw a lot more current while its warming up then when its running. Are your lights running on one leg of the same 415 VAC circuit? Reflow ovens are mostly resistive loa
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800