Electronics Forum | Mon May 09 09:25:51 EDT 2016 | jorgenino
Hello I am new to SMT line maintenance. I was wondering what a good option is for a lubricant that we can use in our Heller reflow oven. Especially the witdh adjusting lead screw. The manual recommends Krytox but does not state a specific one. Thanks
Electronics Forum | Mon May 09 10:00:13 EDT 2016 | cbeneat
We don't have Heller, but Vitronics uses copper anti-seize.
Electronics Forum | Fri May 18 15:58:37 EDT 2018 | mainenetservices
Please contact Heller at info@hellerindustries.com with oven model and serial number.
Electronics Forum | Tue Nov 16 09:51:25 EST 1999 | greg
has anyone used the small heller 988 reflow? If so what is your opinion of this machine.. is it comperable to the larger heller with a slower rate? i am looking for a small straight forward reflow for a thin, single sided project but i will dedica
Electronics Forum | Wed Nov 17 11:30:33 EST 1999 | Dave F
Greg: Heller 988s are good, solid, basic reflow machines that will turn paste liquid for 85-90% of all applications. I'm not sure what you mean by "is it comperable to the larger heller with a slower rate?" But, yes it will need to be run slower t
Electronics Forum | Fri Jul 07 10:59:15 EDT 2017 | capse
I looked at the tech data for the coating. It appears to need an explosion proof oven for curing (flammable vapors from solvent). I doubt the Heller reflow is explosion proof type oven.
Electronics Forum | Thu Jul 06 12:31:25 EDT 2017 | bmedeiros2017
Hello, Curious to know if anyone has had some experience converting a Heller reflow oven to Cure 1B73 Coating material. Please share experience and process parameters to help obtain cure to conformal coated boards. TIA!!!
Electronics Forum | Thu May 17 07:45:20 EDT 2018 | vikrantraina
We have Heller Reflow Model 1809 EXL. Today we opened it hood for internal cleaning but now not able to close them. Hood opened more from entry side. We tried to manually force open from exit side & check closing with open/close button, but hood comi
Electronics Forum | Fri Feb 25 16:16:01 EST 2005 | pjc
Here are some 5 zones models to look for: Electrovert OmniFlo5 Conceptronic HVA70 BTU VIP70 Vitronics SMR or XPM 520 Heller 1088 (4 zone)
Electronics Forum | Sat Apr 13 20:23:41 EDT 2019 | kylehunter
The 1500 is rated for up to 300c. So it shouldn't have a problem with lead free right? http://www.petlock.com/data/Heller_1500_specs.htm
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
winsouce.jpg)