Electronics Forum | Thu Feb 21 08:52:24 EST 2013 | emeto
Currently having Elecrtovert and BTU - no problems with both. Before use to have Vitronics aand Heller - and no problems with the rails. However I had other problems with Heller which makes me think that they are going deeper with the bad quality par
Electronics Forum | Wed Feb 20 16:03:19 EST 2013 | bocci572
I am wondering if anyone has had issues with their Heller oven rails warping. It appears that our 1800EXL and 1900W oven rails sag after time. They eventually contact the safety mesh and then create hestitation of the chain, thus creating defects.
Electronics Forum | Thu Feb 21 06:18:42 EST 2013 | cbeneat
We run 3 Vitronics XPM2's, our newest is 3 years, oldest is 6+ and I have not seen our rails warp the way you're describing. I would be plenty frustrated if I had to replace rails this often.
Electronics Forum | Wed Jun 16 08:16:27 EDT 2021 | shmevan91
Hi, Could anyone shed some light why a mk5 13 zone heller ovens rail width won't auto adjust? has to be done by hand every time we change product. The board support rail will adjust just not the main rail, have tried swapping the two cards around bu
Electronics Forum | Fri Mar 08 16:30:53 EST 2013 | pctech
We have 1880 Heller about 12 years old and running like a charm everyday. I doubt that lead or non-lead operations will have anything to do with it. Do you use high temperature lubricant on edge hold chain and rail periodically? This may help to ease
Electronics Forum | Wed Feb 27 11:20:15 EST 2013 | marcpeo
Sorry to hear of the difficulty with the rails on these systems. The 2 machines mentioned are 10 years old or more. The rails typcially last quite a while but replacement after 10 years is possible. Please feel free to e-mail me directly to discus
Electronics Forum | Tue Dec 04 12:30:58 EST 2018 | bmalhi
You need to verify the Rail parallelism. Please contact Heller Service department ServiceNJ@hellerindustries.com to get procedure. Please make sure to provide oven model, serial number.
Electronics Forum | Tue Oct 18 12:23:04 EDT 2005 | DannyJ
To the Heller question... I have had a few minor bad experiences with Heller. On the 1800 series, redid the movable rail section, which required complete disassembly of the offload end of the oven. A little bit of forethought in design may have ha
Electronics Forum | Tue Aug 20 10:07:44 EDT 2013 | mccabekev
I moved the fixed rail in by about 2 inches and it seems to have done the trick. Rail movement is easy, moving machine to keep all conveyors in line not so easy
Electronics Forum | Mon Dec 03 08:57:14 EST 2018 | robl
Sounds like bent rails. Do you have a laser pen you can shine down both sides of both rails to see if there is any curve?
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
.gif)
.gif)
