Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
Electronics Forum | Fri Dec 08 19:02:12 EST 2023 | madisreivik
Found the main problem During messing around (hopelessly :) we had found the calibration menu and pressed "check". Machine thought that there was a calibration nozzle (maybe 10x10mm square) but in reality, there was d=1.0mm nozzle. Machine decided
Electronics Forum | Thu Mar 23 04:44:46 EDT 2023 | gwideman
We are looking to obtain (probably make) the calibration tools used in the camera calibration procedures. To that end, any photos and dimensions would be highly appreciated! The set consists of one or two plates and a hat that fits on the up camer
Electronics Forum | Fri Aug 08 11:37:09 EDT 2008 | pjc
Yes, sure. In fact in some applications ICT is coming back. Mainly due to the fact that more and more SMT discrete components have no markings, so AOI cannot tell you if you have the correct value on the PCB. Fixed pin or flying probe ICT is a valuab
Electronics Forum | Tue Dec 12 17:34:39 EST 2017 | spoiltforchoice
A pattern emerges, but really I think it means plan/optimise for your day/week not a single job. Our machine uses 10's, this means there's a significant chunk of the feeder that is not easily accessible if something like a brass shim gets stuck or f
Electronics Forum | Mon Apr 15 09:27:10 EDT 2019 | robl
Opal Xii if it has the 8 head conversion. Much faster in real life than a 2060, and parts such as cards more readily available. Had both machines and much prefer the Yamaha built Assembleon badged machines. Both will do 01005. If you do go Juki th
Electronics Forum | Mon Mar 09 15:53:05 EST 1998 | Tom Foley
| I am looking for component placer that can handle not only smc but also flip chip C4. | If there is any machine satisfying my request, please inform me. | machine name , spec, and so on. Take a close look at the Philips ACM. The ACM is engineere
Electronics Forum | Fri May 14 18:29:26 EDT 1999 | Earl Moon
| Hi Guys, | | I am going to be graced with the good luck of processing microBGA's in the near future. A bit of a step forward from printing 20-mil pitch and wave soldering 0805's, wouldn't you say? | | So, any of you folks who have already experi
Electronics Forum | Tue May 18 03:17:50 EDT 1999 | Philip B
| | Hi Guys, | | | | I am going to be graced with the good luck of processing microBGA's in the near future. A bit of a step forward from printing 20-mil pitch and wave soldering 0805's, wouldn't you say? | | | | So, any of you folks who have alre
Electronics Forum | Tue Aug 26 16:24:18 EDT 2008 | rway
We currently use a YesTech M1 system and we are looking to buy another. Two important areas to look at when pursuing AOI equipment: 1) Camera resolution 2) Light sources Depending on your needs, camera resolution can be important depending on the si
