Electronics Forum | Fri Mar 22 08:15:49 EST 2002 | PeteC
If considering CP-6 go for the model CP-642, an improvment. Most equipment have hour counters or placement counters and you'll want to get the "counts" See it running and do a qualification run before you make the purchase.
Electronics Forum | Thu Sep 26 10:04:46 EDT 2013 | nophsem
I tested original 'bad' SRX card in the other machine and it doesn't work, same error: SRX Autobaud Motor error #5 With our QUAD 4C, (Machine speed setting) MC 53= 0 (high speed), I changed =1 (low speed), same error
Electronics Forum | Sun Oct 21 22:10:37 EDT 2012 | eadthem
We have also experienced the same. a RAID array helps but there are a lot of static waits in Mirtecs software so it dosen't matter how fast you make the computer it still takes the same time to do a lot of waiting on the computer tasks. For exampl
Electronics Forum | Sun Apr 25 02:58:58 EDT 1999 | Haim H.
| Hey Ya'll! | | Have any of you ever worked with one of V-Tek's "Economax" tape and reel machines? The biggest thing I'm curious about is the type of cover tape that these machines use. It's something they call P.S.A. (Pressure Sensitive Adhesive)c
Electronics Forum | Fri Jun 04 23:44:07 EDT 1999 | Dean
| | Has anyone had a problem with the trailer tape length being too short and causing placement machine to stop for parts exhaust (SMT parts)? I realize the EIA spec. is set for this length but would like to know what issues you have had. Thanks |
Electronics Forum | Sat Jun 05 07:47:47 EDT 1999 | Dave F
| | | Has anyone had a problem with the trailer tape length being too short and causing placement machine to stop for parts exhaust (SMT parts)? I realize the EIA spec. is set for this length but would like to know what issues you have had. Thanks
Electronics Forum | Tue Jul 11 23:28:59 EDT 2006 | donb
Hi All, I have a continuing problem here with mis-alignment of parts on one of our Fuji CP-3 machines and I thought one of you esteemed engineering types may be able to give me a clue as to where the problem might lie. I have a Fuji trained enginee
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
Electronics Forum | Sat Feb 12 09:38:39 EST 2005 | primus
I think you may be assuming that our operators aren't already doing that. We need to be able to bypass the interlocks... how do you think our operators make line adjustments? Step the machine, drop the tooling, and eyeball it. That's it. The operator
Electronics Forum | Wed Sep 25 09:59:44 EDT 2013 | bobpan
Hello, This is from my old documents....hope it helps. I would first try mod code 53 = 2 first.....if the machine is a 2C. The motor was known for causing this problem after getting old. These are all resolutions for motor error 4. Step Potential P
