Electronics Forum | Fri Jan 09 18:28:34 EST 2004 | Ron W
I'd like to know if anyone could recommend a good high-temperature adhesive that can be used for thermocouple attachment. I've always used high-temp solder and tape in the past, but would like to try using adhesive. Any info is certainly appreciated.
Electronics Forum | Thu Aug 17 01:31:31 EDT 2000 | Dreamsniper
Steve, I'm using 5 Sn/1.5 Ag/93.5 Pb Solder wire with a melting point of 300 deg. C to connect my thermocouples on smd components for thermal profiling. I'm using a soldering iron with an adjustable temp. to be able to melt my solder wire. Temp is ab
Electronics Forum | Wed Feb 21 16:03:14 EST 2001 | blnorman
You're right, manufacturers time/temps will vary. A single manufacturer will have a host of materials with different cure schedules. We currently use 2 epoxies that cure in 2 - 3 minutes at 150�C. One will also cure in 5 minutes at 125�C. Talk t
Electronics Forum | Fri Dec 02 08:57:39 EST 2005 | russ
You hit it on the nose Pavel, the fluxes in paste are formulated to have 2 activating points if you will, one at low temp and one at high temp. when the low temp flux gets killed this is what you will see. This is the main reason we opted out of K
Electronics Forum | Tue Feb 13 14:39:52 EST 2018 | horchak
Your profile reflow temps are too low. Omnix338 has a melting temp of 217-221C. Your right on the edge, and your soak temps should be closer to 150 than 180C. Bottom line too high a soak, too low a reflow. Take it or leave it.1874
Electronics Forum | Tue Jun 27 11:10:20 EDT 2000 | L Lovell
I need a reball kit for high temp balls. can anyone help? Thanks Leon
Electronics Forum | Fri May 14 00:34:22 EDT 1999 | Mike D.
| I need some pics or documentation on how a finish soldered joint looks like for SMT component. I have various people who supposedly says has knowledge with High Temp says my joint could look better. The joint looks shiny and great except for a grai
Electronics Forum | Fri May 23 14:39:00 EDT 2003 | bradlanger
Cameron, I am burying the thermocouple in high temp solder on the solder pad of the area I want to profile.
Electronics Forum | Fri Jan 16 18:37:03 EST 2004 | adlsmt
Anyone have an inexpensive vendor for high temp board labels?
Electronics Forum | Thu Aug 24 10:11:09 EDT 2006 | russ
Paste flux exclusively, unless it is high temp ball Non reflowable), then paste is used. Russ
