Electronics Forum | Fri Oct 18 15:58:42 EDT 2019 | tech1
3 different A12 tools and the same error could be a problem with the tool holder or a parameter. I suppose the locking tabs in the holder could be worn or bent and you could try removing one of the pins from the tool and setting it in a different loc
Electronics Forum | Wed Jun 26 17:51:55 EDT 2013 | ryansmta
Thank you for your response and interest to help me with my research work. I am actually in need of the Reel Holder. I am aware of a few services that can package the treated 0402 / 0201 components into a tape and reel. I have also spoken to MidAm
Electronics Forum | Tue May 15 09:01:41 EDT 2001 | davef
Stephan makes good points. While monitoring the temperature in the plant is good, it might be more appropriate to measure the temperature in the cabinet of your dispensor. A sure indicator of temperature change is process changes over time. Consid
Electronics Forum | Wed Mar 02 10:49:45 EST 2005 | Dave Erbst
Try checking your Z height and also make sure that they are cleaned regularly. If the Z height is off your will be pressing your nozzles into the holders thereby causing them to bind up inside the holder. Replace the springs periodically since they d
Electronics Forum | Mon Mar 13 18:06:35 EST 2006 | slthomas
So, if 45� is theoretically optimal for aperture fill, but 60� is better for defining fine pitch bricks, is 52.5� the best compromise for an all around design, or does it not work that way? I see blades with either one angle or the other but with th
Electronics Forum | Thu Aug 03 13:35:50 EDT 2006 | SWAG
Sorry - don't know of any studies/papers. Having dedicated blades and holders for lead free is best. Also, our customer for lead free requires a line change-over check-off sheet that we follow, sign and keep with all the paperwork for the order. T
Electronics Forum | Wed Dec 30 14:51:50 EST 2009 | gantry
Craig - It has been quite a while but from what I remember you teach the tray holder in teach table top. Then you have to put the part/tray on the the tray holder. Also, ensure the part is in your program. I don't remember where to do that but I
Electronics Forum | Mon Jul 01 11:29:02 EDT 2013 | hegemon
I am guessing a lead free process. From the pictures, I don't neccessarily see any issues, perhaps the leads have wicked up a little too much solder, making the joint look a little starved. But I think I see nice toe and side fillets. In the worst c
Electronics Forum | Tue Sep 14 07:44:16 EDT 2021 | bukas
hi James. does this happen with every head or just Z6? Does the head move vertically at all? What ANC holder is selected in setup "Hole position detail"? There should be 4 options for "ANC hole position version". If the machine is CP45FV NEO then ANC
Electronics Forum | Wed Jun 08 19:18:43 EDT 2022 | fuji_user_2014
I'm having some issues with lead time with my current fabricator of work board holders for my Universal THT machines (I won't name names). I've been waiting for a couple of months on some of my orders from them. My machines have a standard rotating t
