Electronics Forum | Thu Oct 17 10:27:32 EDT 2002 | davef
This is for Pete. He's very busy today, trying to make money to feed the wife and kids. Why doesn't the new SMTnet "home" look like the old "home"? * New "home" has like three boxes that each go all the way across the page. * Old "home" had like si
Electronics Forum | Fri Mar 22 13:32:15 EDT 2019 | kahrpr
all the motors on the head are the same just the connecting cable are different length. the motors have a home position for the zero pulse that home position has to match when the flag passes through the homing sensor all servos have a home position
Electronics Forum | Tue Aug 07 04:30:21 EDT 2012 | haiae
Could every one out there help me to solve Homing's problem with Contact 3AVX machine? I can not finish homing my machine cause error message as follows: "Head 1 - max index pulse iterations reached" Many thanks,
Electronics Forum | Mon May 03 15:58:52 EDT 2021 | lt
Koh Young 3030 SPI machine. Has been running for the last 1-2 years. Now, it boots up as expected, up until the point where it should Home, but it does not Home. Any ideas what could cause it not to home. I know the older KY's are sensitive about
Electronics Forum | Mon Jul 16 14:38:22 EDT 2001 | ohboy
If your pad designs don't meet IPC recommendations, using home plate may have adversely affected the (possibly marginal) placement tolerances. This could also be caused by an incorrect home plate design, which IPC has also given recommendations for,
Electronics Forum | Tue Jul 14 12:34:30 EDT 1998 | ETS, LLC
Why is it not possible to include an image when posting an item for sale on the PCB CE Mart? If this was possible people advertising used equipment could include an image from the manufacturers home page. Also it would be nice if the person posting t
Electronics Forum | Mon Jan 12 14:50:18 EST 2009 | mosborne
A customer of mine has a Quad 4C that will not home in the X. It used to have the problem in the Y then they changed the cards and now that machine will not home in the X when powered up. Anybody have any ideas. I think I know what the problem is, bu
Electronics Forum | Sun Feb 09 19:16:22 EST 2014 | navworx
Was running production when the head just came to a stop, motor went off, error window said to home. Upon attempting to home, got message: G1T2 homing error; index mark not found. I've tried rebooting the machine, but this error still appears. Any
Electronics Forum | Mon Jun 12 21:16:41 EDT 2017 | kahrpr
you can not just take the motor off and change it. the motors have a home pulse singnial. the motor has to be in a certian position the home pulse position when the flag hits the sensor. When you remove the motor you have to mark the motor gear when
Electronics Forum | Thu Jun 06 09:03:48 EDT 2019 | bobpan
If the part is 10mm or less as long as you are scanning it near the top...it should work. The other possible problem is dirt on the quadalign lens. Clean off the lens and watch it when it homes....both heads should home the same way. If the head jum
