Electronics Forum | Thu Sep 05 07:14:16 EDT 2019 | smrsteve
Hello Bobpan, Thanks for the suggestions. Sorry I didn't reply yesterday as I'd gone home - I'm in the UK, so I'm guessing there's a time difference. Okay, I found the control to turn off the vacuum verify - it's SHIFT - SWITCH/VERIFY. Makes no di
Electronics Forum | Mon Jan 12 14:50:18 EST 2009 | mosborne
A customer of mine has a Quad 4C that will not home in the X. It used to have the problem in the Y then they changed the cards and now that machine will not home in the X when powered up. Anybody have any ideas. I think I know what the problem is, bu
Electronics Forum | Wed Oct 25 21:39:16 EDT 2023 | heinar
Hi, i not found bios battery...
Electronics Forum | Thu Jun 06 09:03:48 EDT 2019 | bobpan
If the part is 10mm or less as long as you are scanning it near the top...it should work. The other possible problem is dirt on the quadalign lens. Clean off the lens and watch it when it homes....both heads should home the same way. If the head jum
Electronics Forum | Thu Nov 12 04:40:03 EST 1998 | Galen
| Scott - Good to see things are going well for you. With regard to your comments, Quad has introduced a complete line of Semi-conductor/APT machines (Q Series) that support both SMT and Semi-conductor applications. The machines were introduced in
Electronics Forum | Sun Feb 09 19:16:22 EST 2014 | navworx
Was running production when the head just came to a stop, motor went off, error window said to home. Upon attempting to home, got message: G1T2 homing error; index mark not found. I've tried rebooting the machine, but this error still appears. Any
Electronics Forum | Mon Nov 24 16:29:10 EST 2014 | kevinb
I have a Quad QSV-1 machine. It has been off for over a year with no power to it at all. I found out that I lost the BIOS on the machine. I have two QSV-1 with the serial numbers one apart from the other so I copied the bios from one to the other
Electronics Forum | Tue Jan 11 13:28:14 EST 2011 | jmw
0603 and up should be no problem on the machine. If you are doing under 25 mil pitch the machine needs an upward camera to repeatably place the parts. You will always lose the first 10 or so parts with cut tape but that should be about it. Repair par
Electronics Forum | Mon Jun 10 12:59:12 EDT 2013 | rollon65
Hi. Bobpan. Thanks for the reply. This CE machine does not have the side cover switches like my others do, but the good news is that I have now got the machine to initialize and home etc. I bought the machine "as seen" although I was told it was a
Electronics Forum | Mon Jul 29 13:59:56 EDT 2002 | Garth
Their company isn't new although as I mentioned they have a new line of pick and place machines designed specifically for low to medium volume users. Their web site is http://www.apsgold.com When I attended the Apex show in San Diego last January I
