Electronics Forum | Fri Nov 07 23:40:41 EST 2008 | padawanlinuxero
I have been working on the SMT area for a while now, must of my experience is on programming and pick and place, now in my new job I have to control a complete SMT line and I have a little knowledge on working with solder paste but I like to read mor
Electronics Forum | Wed Jul 18 08:32:34 EDT 2018 | robertbronx
Hi Good Morning to everyone in the forum!! We still learning with a used EKRA E4 printer. Our Co bought a used printer EKRA E4 without any manuals.I would like to know some info about: How create a new process file "STEP by STEP". Thanks to all of yo
Electronics Forum | Fri Aug 17 10:49:13 EDT 2018 | gpascolla
Hello, I am new to this group, and the company I am working for has started a SMT department we have an older and used line of equipment. We have a EKRA E-1 screen printer and a Juki FM-740. None of this I know how to program,any help would be much a
Electronics Forum | Tue Oct 01 11:48:01 EDT 2013 | bengt
Hi All. We have bought EKRA E4 screenprinter. We are running R to L and printer has L to R direction. Does anyone can help me on this ? On specs it says all kind of directions.
Electronics Forum | Mon May 21 16:19:40 EDT 2012 | tbouslog
We are using Ekra Stencil printers and they are great except for 1 problem... We run several different boards a day and we need a way for the operators to place the pin supports in the same postions on the second side of the board everytime a board i
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Tue Jun 01 05:17:16 EDT 2004 | Alistair MacAdam
I am currently looking at the volume of paste being deposited on a PWB 2.4mm thick with a 0.25mm tolerance. I am looking for information on PWB variation and a MPM AP25 series printer, and can the volume of paste be controlled on varing PWB thickness
Electronics Forum | Wed May 23 18:45:57 EDT 2012 | stentech
I would agree with Sr Tech..Grid lock and systems like this can be used on the Ekra, MPM and DEK printers also can be used in Pick and place depending on the density of pin. If you choose the method of printing out a 1:1 photoplot. Glue it to a piece
Electronics Forum | Sun Mar 22 09:10:54 EDT 2020 | kumarb
Hi Steve. Just came across your post. We are in the same boat with our Ekra X4 printer. Any resolution on your side? We have been attempting to track down a fresh ballast but the original (OSRAM HF 2x36 dimmable with 0-10V) is EOL and no where to be
Electronics Forum | Fri Apr 30 10:42:40 EDT 2021 | oxygensmd
I have a customer who ask close to prototyping jobs with low volume and high-mix components. A regular job have around 5-30 pieces board but have high quantity and many type of components. All the time over 1000 pieces of parts on board from 250-350
| 1 |
