Electronics Forum | Tue May 05 15:45:37 EDT 1998 | Dave F
| Looking to buy used or new tubes, that will fit an SOIC-16 | Need these tubes ASAP. We need to bake these parts and drypack. | Please email or call if you can help. | Eric Jenkins | 801 956-0897 Eric I'm not sure of the manufacturer of the parts th
Electronics Forum | Tue Jan 10 22:10:29 EST 2012 | doncattoni
Hello Austin, Sorry for the delayed response. There are different types of cures for conformal coating such as RTV which stands for Room Temperature Vulcanising which means they are cured by the humidity in the air. This type of cure does not need
Electronics Forum | Sun Sep 07 20:51:52 EDT 2014 | natashakt
1. Is the high RH environment consistently at 72% RH and 21.4 degrees Celsius? No, over the past 2 weeks I have recorded the highest at the moment: 67% RH at 22.6 degrees C and lowest (it is Spring not summer yet): 31.9% RH at 19.0 degrees C. Or d
Electronics Forum | Thu Sep 30 21:37:44 EDT 1999 | Dreamsniper
| | Hi everyone, | | | | Greetings! | | | | I�ve got a 2-layered through-hole PCB�s having the following problems: | | | | Solder Mask peels after wave soldering at random locations and only at the bootom side of the PCB | | Insufficient Solder an
Electronics Forum | Thu Sep 30 12:29:01 EDT 1999 | Dave F
| Hi everyone, | | Greetings! | | I�ve got a 2-layered through-hole PCB�s having the following problems: | | Solder Mask peels after wave soldering at random locations and only at the bootom side of the PCB | Insufficient Solder and some solder ne
Electronics Forum | Mon Oct 22 17:37:51 EDT 2001 | davef
I�m aware of no such standard. There may be something in Euroland [ie, IEC, etc.] TM-650 �Test Methods Manual� has procedures for measuring various types of contamination, such as: * 2.2.25 �Detection Of Ionizable Surface Contaminants� * 2.2.27 �Cl
Electronics Forum | Mon Nov 03 16:09:42 EST 2008 | Frank
Oddly enough, I find it more often than not that the supply type is not mentioned in the data sheets. And if the original author was saying 0603 in a metric package, then it would be in 8x2 tape. Even in the US, some companies use the metric names
Electronics Forum | Wed Sep 24 09:53:25 EDT 2014 | rgduval
For me, it would depend on a couple of things: 1. How many parts are stored in this manner on a regular basis? 2. Was the oven used for anything else other than this type of storage? If it was a low volume of parts, and the oven wasn't used for
Electronics Forum | Thu Sep 04 03:26:18 EDT 2014 | eurekadrytech
Hi all: Interesting question you have raised as it concerns the rate of absorption by the board material. I represent http://www.EurekaDrytech.com and could assist in resolving the blistering problems you're facing. First some questions. 1. Is the
Electronics Forum | Fri Jul 29 13:30:43 EDT 2016 | gregp
Versatec specializes in the remanufacture of Contact Systems machines, most notably the CS-400E component locator with programmable cut and clinch. these machines are field proven over the past two decades and provide many benefits when utilized: 1.
