Electronics Forum | Thu Mar 15 16:23:38 EDT 2007 | grantp
Hi, If your doing a line, then your going to need more than the simple prototyping machines listed above in this thread. (Although they are cool ideas, and loved the toaster oven modification guy, and the other guy soldering ic's with it too!) We a
Electronics Forum | Fri Jul 31 02:11:41 EDT 2015 | buckcho
I would recommend either gridlock or machine's own support system. If you need I can refer you to a company, which can make you a custom gridlock, depending of course, where you is your company.
Electronics Forum | Sat Aug 01 03:52:54 EDT 2015 | mikekeens
I have had some custom support jigs made but as i'm working for a contract electronics manufacturer there are so many different PCB assemblies to be made - storage of the different jigs and the changeover time is the problem. The support system ne
Electronics Forum | Wed Jun 06 10:28:39 EDT 2012 | kahrpr
You need to get your local rep to demo the grid loc. That is what it is for double sided boards. when the table comes up the pins adjust to the different height components. I also thought I saw a similar product on one of the advertising Panes on thi
Electronics Forum | Wed Aug 20 17:25:02 EDT 2003 | Dean
Coincidence? I just finished a glass calibration this morning on a P&P machine. Excellent tool for precision calibration. Takes the guess work out of the process. I would disagree with Cal's assessment. His calibration methods may work to suit h
Electronics Forum | Tue Jun 13 13:34:10 EDT 2006 | jsmith01
Does anyone have a Manual for a Hughes/Palomar Htt-1000 power supply and a VTA-96 weld head? I acquired these machines to do a small job that we need to attach a flex cable to a thermal print head. As far as I can tell this division of Hughes was s
Electronics Forum | Thu Jun 05 10:43:51 EDT 2003 | samaniegocesar
Hello to all I need your support, I'm looking a used KME Create servocontroller and the software for Reflow oven of the same line, the part number is: CACR-SR03AB1ERY90 This controller is used in a chipbonding machine BD10 of KME create lines or chi
Electronics Forum | Thu Sep 01 00:52:24 EDT 2005 | adlsmt
Depending on the connector you should be able to use a standard cheap arbor press with some cheap home-made tooling. Standard arbor presses typically have a rotating disc with cut-outs, remove this and put a decent quality stainless steel block in it
Electronics Forum | Fri Oct 29 09:45:08 EDT 2004 | pioneertechnology
In 1995 we bought 4 Vitronics U520 reflow ovens with top heat only. We ran these ovens until 2003 for both curing and lead reflow with no problems. In 1998 we bought 1 U520 top and bottom heat and one U820 top and bottom heat and once again we had
Electronics Forum | Wed Dec 13 11:11:20 EST 2000 | CAL
CONFUSED???? The the "BIG-chip-in-the-middle" on my image is IC732. IC304 is the 52pin QFP to the right of the "BIG-chip-in-the-middle".If it worked when the "Thingy" was there and does not work when the "thingy" is not there good indications are you
