Electronics Forum | Tue Sep 18 12:10:39 EDT 2007 | wailiang81
Hi, good day to all. This is my 1st question post in this forum. Hope able to share some knowledge here. As we know QFP area like 0.4mm pitch was a very critical area to control especially those PCB using silkscreen printing process manufactured. Onc
Electronics Forum | Fri Aug 04 12:57:34 EDT 2000 | Steve Thomas
James, we used to use 3 clamshell type printers (one of which did have a two camera vision system, and did all our fine pitch), but had limited success with 20 mil pitch. 25 mil pitch was no problem. I suspect that you'll find people that have had
Electronics Forum | Thu Jan 04 15:39:07 EST 2007 | dyoungquist
While the 85% yield on a per board basis seems low, we are actually running over 99% yield on a per solder joint basis as there are about 17,700 joints per panel. On average, 9 out of 63 boards in the panel need rework. Rework issues include missin
| 1 |
winsouce.jpg)
