Electronics Forum | Sat Apr 27 01:36:28 EDT 2013 | padawanlinuxero
Until you find something can you apply the 2 man rule? I meant 2 operators to lift the ict fixtures? that's what we do here ours are 20- 40 lbs
Electronics Forum | Thu Mar 16 14:04:14 EST 2000 | Cartman
Greetings. My company has a VOC-Free no-clean wave solder flux with 4% solids. I have a number of questions as they relate to our ICT Fixtures. Currently, we're encountering the following issues: 1.) PM on probes....What is the recommended PM p
Electronics Forum | Thu Aug 23 21:36:21 EDT 2012 | padawanlinuxero
Hello I would go for a Teradyne Z18xx those are kinda low budget, there are some companies that sell them refurbish right off my head I can think of Rocky Mountain Test Equipment talk to John Cowling (303 693 3322) and for the ICT fixtures so that
Electronics Forum | Fri Mar 24 15:31:08 EDT 2017 | elrohir
I have a supplier that want to upgrade all nails on a huge amount of ICT fixture due to test RoHS compliant PCBAs. My thought is that even if there are a very small fraction of residues left on the pins it will never go over the 1000PPM level. In fu
Electronics Forum | Thu Sep 07 11:22:33 EDT 2006 | scombs
We had similar problems with some of our products and found the root cause was our ICT fixture. The damaged balls/pads were always in a certain locations so finding the pattern helped. It also didn't help that the boards were ICT'd 10 + times.
Electronics Forum | Wed Apr 24 14:46:00 EDT 2013 | dyoungquist
Would something like this work? http://www.patientliftusa.com/products/electric-patient-lifts.html You would have to build a custom harness to match your fixture but it is in the $1K-2K price range.
Electronics Forum | Wed Apr 24 12:55:26 EDT 2013 | markhoch
Our Safety Committee has tagged the Fixture Changeover process as potentially unsafe due to the weight of our ICT Test Fixtures. (They range from 40-60lbs each) I've been tasked with investigating a lift, (aka a "cherry picker"), to assist in loadin
Electronics Forum | Mon Mar 17 03:50:12 EDT 2008 | Sean
Hi All, Besides the above question, I have another one as below: (1) How frequent that we need to perform strain gauge study on ICT, Functional test fixture? Is it a necessary to perform this study each time after ICT, Funtional test fixture preve
Electronics Forum | Fri Oct 13 15:55:53 EDT 2000 | Dave F
Guys, two things: 1 Fluxes have different probing chaacteristics. Consider broadening your horizons. 2 Look at SMTnet thread ... ICT Fixtures No-Clean Flux - Cartman 14:04:14 03/16/2000
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
I.C.T Industrial Park, Building 1
Dongguan, 30 China
Phone: +86 13670124230
