Electronics Forum | Mon Feb 26 20:02:42 EST 2001 | davef
First, I don�t understand why your board fabricator can�t do a good job plugging your vias. Additionally, when you consider that they forgot to plug the first batch of boards, it makes me wonder if they are desirable as a supplier. Generally, we us
Electronics Forum | Tue Sep 25 12:49:58 EDT 2001 | Hussman
Been there - done that. Makes a mess on that 2nd reflow process- doesn't it!?!?!? This is caused by design. If the open via is located in the land area, it will flow thru the via and cause pumps on the opposite side. You can have your vias filled
Electronics Forum | Wed Jul 07 10:25:13 EDT 1999 | John Thorup
| | Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. | | John, | It depends......mainly on the via size. Tenting works on smaller vi
Electronics Forum | Wed Jul 07 00:28:59 EDT 1999 | Scott Cook
| Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. John, It depends......mainly on the via size. Tenting works on smaller vias. Tent
Electronics Forum | Fri Apr 27 08:44:08 EDT 2007 | Brett
For those of you who use via holes as test points, and the via holes must be filled at the wave, is it necessary to have a "dome" on every single test point, or is it sufficient to have the via "filled" with solder? The ICT preson here insists that
Electronics Forum | Thu Feb 21 11:43:09 EST 2008 | dphilbrick
I asume you're not ICT-ing this board and using the vias for test points?
Electronics Forum | Fri Apr 27 10:55:54 EDT 2007 | Brett
Pete, is there a probe-style that will accomodate a via that's filled, but a little concave (inward) fillet? The ICT personnel complains about this scenario too. I'm not an ICT person, but I do know that there are pogo pins that have a crown (for t
Electronics Forum | Fri Apr 27 10:38:30 EDT 2007 | pjc
No dome needed. You should check what type probe you have. You can look here and consult with them: http://www.qualmaxamerica.com/qualmax/leeno/semi.asp?string=ICT
Electronics Forum | Tue Jun 15 11:20:34 EDT 2004 | Vic
Hi Guys, Can you give me a good bird's eye view in Verifying First Off via ICT Test. We currently verify our first off via naked eye for just the solder joint quality, orientation of parts etc. Aside from open and shorts, what can ICT verify? how c
Electronics Forum | Thu Sep 21 10:34:20 EDT 2006 | Kerwin Hooshey
Is there an ICT probe style that can pierce through tented (closed) via's?
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
I.C.T Industrial Park, Building 1
Dongguan, 30 China
Phone: +86 13670124230
