Electronics Forum | Fri Feb 13 02:03:32 EST 2015 | lambiaki
Hello Can somebody help me? My company would like to buy a new automatic SMT line. Which equipment is better, YAMAHA YS or Europlacer IINEO II. The capacity is same.
Electronics Forum | Tue Apr 03 20:46:32 EDT 2007 | Mike Konrad
We manufacture similar equipment. I would recommend that most of the testing be performed in an automatic shut-off mode. There are potential issues with both methods, automatic shut-off and fixed time tests. In an automatic shut-off mode, the cl
Electronics Forum | Tue May 31 16:52:57 EDT 2011 | xray
Hi SSager, Check out the FA Inspector. It provides 1 Automatic Detection Mode and 2 Manual Inspection Modes. Its used to automate First Article Inspection Tasks and enhance today's principally manual process using microscopes and pen and paper. T
Electronics Forum | Thu Sep 02 16:12:51 EDT 2004 | Mike Konrad
Hi -K We are a manufacturer of ionic contamination testers (not yours). In most cases, automatic mode is appropriate. In some instances however, you may need extra time to �release� entrapped contamination from the sample. Automatic mode is not a
Electronics Forum | Wed Apr 28 10:32:19 EDT 2004 | vickt
This was not a automatic feature of the 4796 series HSPs. You can try to continue to reset-start the feeder crg after each component missing event,and slowly build the remaining placements, but at some point you will reach a dead end. My best advice
Electronics Forum | Thu Feb 16 09:37:11 EST 2006 | mgillespie
hi, > > we tried to introduce form-flex a few > years back and it caused more problems than it > fixed. > > Switched back to pins and no > problems. > > It might have improved since but I > would be reluctant to get them again unless I was >
Electronics Forum | Wed Feb 16 12:56:44 EST 2011 | gabriel1blue
Thank you, I have the program done and ready to run, but Im not able to get the machine to move to the mount location automatically, you say to highlight the location and press shift + P or T but how do I highlight the x,y data 1st? Or is this done o
Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox
R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp
Electronics Forum | Fri May 10 01:30:15 EDT 2024 | nicholascarson
Access the Calibration Screen: Navigate to the system settings menu on the HMI and find the calibration option. This may require entering a password or accessing a service mode, depending on the machine's security settings. Begin Calibration: Once
Electronics Forum | Thu Mar 02 20:06:51 EST 2023 | kumarb
Thanks for your comments. The table aligns fine but just makes the whining / ticking sound when using the 'REFERENCE' command. In this command the table moves more than the live 'AUTOMATIC' mode. The motors are working fine to align the PCB & stenci
