Electronics Forum | Tue Nov 04 12:58:17 EST 2008 | smt123
I have to agree with Patrick here. This image appears to show a board that is NOT HASL as there is what appears to be a copper pad in the upper portion of the image. But then again the arrow tip appears to be white and I woudl expect that to be red s
Electronics Forum | Fri Mar 26 15:17:30 EDT 2010 | jooh
Thanks for your replies! So what I understand is that ICT in reality is "only" a production process safety net, but it's a net that in most practical cases is needed. What ICT can not catch is (all) bad solder joints. What are the methods to find t
Electronics Forum | Thu Feb 24 23:11:51 EST 2011 | kemasta
HI I have this BGA short issue, I took x-ray image, the solder ball having big void. We suspect the pad on BGA was oxidie. Reject percentage quite low, only 5 out of 6000. But after the BGA re-ball, is work fine. Anyone have any idea to trobleshoot
Electronics Forum | Tue Jan 03 14:35:40 EST 2012 | comando
Yes I have this tools and jigs but I can't to complete first calibation (Image camera Y Adjustment) I done all and the nozzle is in the center of display but the machine don't perform this calibration. the nozzle image in display look litle big than
Electronics Forum | Sun Jan 20 17:55:49 EST 2013 | ngineer
Mikej, I'm only running a single image, just want to correct for the slight variations in how the board seats in the transport. It's not more than a few mils off, but enough to cause an issue on fine pitch parts. I don't have any image fiducial
Electronics Forum | Wed Sep 19 11:40:18 EDT 2012 | dekhead
Not true... with manual screen load machines (LT / Horizon), you need to ascertain the correct position / measurement and can load to that position. Auto load machines there is a "custom screen" setting which is used to tell machine the position ("Di
Electronics Forum | Wed Aug 07 16:33:08 EDT 2013 | rway
I did not see the histogram image (didn't scroll down). My point about the flat metal surfaces is they should have a large white total under top-light with red filter. You should be able to distinguish between the two (fillets and no fillets). I k
Electronics Forum | Tue Jun 23 10:39:53 EDT 2015 | robie69
I've read through an old Mirtec thread and in it a couple of guys mentioned that they have issues with their side view camera(s). I'm currently having issues with both of mine, where the image will become blurry, and it will add purple lines to the
Electronics Forum | Wed Jul 29 10:27:01 EDT 2015 | risorse_new
Goodmornin I have a problem with the fixing and move cameras, i don't see the image of the cameras on the screen. On the monitor i see the cross and letter, but i can no see on the black box the camera images. I know the problem is on the ADDA Board.
Electronics Forum | Wed Nov 29 06:24:49 EST 2017 | sarason
It should be possible to use Ghost to copy the Harddisk nut installing it in another machine. The next trick is to repair the image by cutting the missing bit from another image made on a Virtual Machine. Be careful to use the same version that was o
winsouce.jpg)
