Electronics Forum | Wed Sep 19 09:20:05 EDT 2012 | georgert
When possible we put 2 images on a stencil to save money and storage space. I was told the DEK can not use offset images, Is this true?
Electronics Forum | Wed Sep 19 09:58:24 EDT 2012 | stivais
Probably depends on the model. We have DEK Horizon and we sometimes place 2 images on the same sheet (in the Y dimension. It's not possible for the X dimension). Just make sure that there's enough space for a paste roll and squeegees between the imag
Electronics Forum | Mon Mar 04 19:05:44 EST 2013 | jaimebc
Deni, it is a 630 and there is text in the window, just no image of the component or anything else that is brought to the camera. It doesn't time out at all, it just moves the way it would when inspecting a component on test mode.
Electronics Forum | Thu Aug 28 04:31:22 EDT 2014 | jana
Thanks for the reply. So a mix of two images is made by optics(2 prisms) and ONE camera shows the result? Or there are two cameras and a mix of two images is made in video mixture device?
Electronics Forum | Wed Sep 20 09:24:34 EDT 2017 | leeg
We are due to build a board with a few of the Andon Image Sensor Connectors on and was wondering whether anyone has any experience of these devices? Manufacturing guides, inspection guides and rework guides?
Electronics Forum | Wed Jun 26 14:33:52 EDT 2019 | slthomas
Do you have any images that show the soldered terminations? Also images of the pcb terminations after the part has moved might be helpful.
Electronics Forum | Thu Aug 01 04:57:10 EDT 2019 | ameenullakhan
hi Team, observed component skew during reflow process. Inductor location. I have attached the image for the same. Please provide your valuable feedback. Attached are the images for the same. Its SAC305 alloy , R0L1 flux chemistry. Regards, Am
Electronics Forum | Fri Nov 08 16:47:55 EST 2019 | solderingpro
I work with PROMATION USA and we offer solutions for large magazine handling (specifically for LED Mfg.). Please refer to image below to assist with your request for info: https://images.app.goo.gl/ozvTXM4JgyjoXaSM9
Electronics Forum | Fri Apr 29 17:06:57 EDT 2022 | tey422
Unscrew it, pull it out at least a bit so you can take a better frontal image of it and from the side too. Then you would have better luck to find what connector it is by using the Google Image search
Electronics Forum | Wed Feb 07 15:04:57 EST 2024 | ttheis
We commonly put two images on a stencil 180 deg apart to save space and reduce cost. We keep the image centered left/right because the machines don't like it when they are offset, but turning them around front to back is no issue.
