Electronics Forum | Wed May 04 09:37:08 EDT 2005 | MikeaJ
I would not recommend trying to cram or mix and match multiple images on a stencil. Especially if you are a contract house, and your clients don't understand why sending one board seperate from a panel of four is a pain in the face. However, I have h
Electronics Forum | Tue Dec 15 11:14:40 EST 2015 | ilavu
You can create backup image of your entire hard drive using Acronis TrueImage or ghost. I use acronis and never had any problem. As for the hard drive size, "YOU DON"T HAVE TO BUY OLD USED HARD DRIVE". Size of the new hard drive does not matter if yo
Electronics Forum | Tue May 19 21:02:20 EDT 1998 | Steve Gregory
Hey there ya'll... I was reading the messages from Earl asking where he could upload some articles he wrote, and I was asked how one goes about putting a image in the messages here... Ya'll see down at the bottom where it says; "Optional Ima
Electronics Forum | Thu Nov 08 08:44:22 EST 2007 | aj
Hi, I have just taken a look at the Connector Images. Is there a difference in pitch between both connectors ? From the photo it looks like the Annular Rings are oversized on Image #1 especially around the centre area ( this might be the image ).
Electronics Forum | Tue Mar 02 16:49:37 EST 2010 | davef
For a earlier, similar thread posted by an old friend Cal Driscoll ... Classes of BGA inspection machines * GO/No-go Machine specs: 50Kv, limited zoom, perpendicular head, board size. * Low to mid range machine:+75Kv, Angular inspection,zoom,image c
Electronics Forum | Thu Jul 26 12:04:16 EDT 2018 | wendymm
RS-274X file contains the complete description of a PCB layer image without requiring any external files. It has all the imaging operators needed for a PCB image. Any aperture shape can be defined as well as positive and negative objects. Maybe that
Electronics Forum | Sun Jul 05 22:21:58 EDT 2020 | raoult
Hi, The micro switch is broken on my device, it was a tactile one (4mm) : image1, image2 Do you think I can buy another one and just solder it like this with 2 wires (I can't solder it back to where it was because it's too tiny I don't have the sk
Electronics Forum | Thu Feb 15 03:25:44 EST 2024 | ttheis
We always image the hdd on any machine in case this happens. Then you just need to buy an hdd and write the image back. If you just need a new hdd I would look on ebay for the part number or a compatible alternate. You can even find new old stock a
Electronics Forum | Thu Dec 07 06:00:17 EST 2000 | Hany
Hello: Could I put an image of a defective solderd PCB in the forum place? How?
Electronics Forum | Mon May 07 09:43:22 EDT 2001 | martys
Which AOI imaging method is best for the post-solder stage- 2D or 3D?
