Electronics Forum | Thu Aug 16 19:28:23 EDT 2007 | karenp
What do you think is gonna impact or benefit using board without silkscreen on it, talking about quality and manufacturing methods??.. I mean.. it is an opportunity or bad idea.. specs of assemblies refers always to references on board so schematics
Electronics Forum | Thu Sep 07 11:02:29 EDT 2000 | Travis Slaughter
Maybe its not splatter, in my experience a sloppy operator can get paste on contacts and just one sphere can rune them and can look like splatter.
Electronics Forum | Fri Sep 08 00:24:35 EDT 2000 | Jim Arnold
Sudden flux boil will cause splatter. More thorough drying or a slower intial ramp to allow drying to occur before a boil or "splatter" temperature is reached may aid your problem.
Electronics Forum | Thu Sep 07 10:03:30 EDT 2000 | KS Wong
Hello, I am looking for input on the 7 zone convectional reflow oven on the temperature profiling. I having a problem with the flux/solder spattering on the Au cotact fingers. I have ran some experiment with the soak time and reflow time. Anyway,
Electronics Forum | Fri Sep 08 04:45:17 EDT 2000 | PeterB
As per Travis's reply it could be something other than the reflow process. Another good one is if the printed PCB's have been cleaned down due to print misregistration etc.. If not properly controlled paste residues can remain distributed about the p
Electronics Forum | Thu Aug 16 22:12:41 EDT 2007 | davef
There is limited benefit to silk screen legends. They cost ~$45 a side per batch. There is benefit to some board users in having reference designator and orientation markings as an aid in test and repair actions. There is no reason these markings
Electronics Forum | Fri Aug 17 10:15:54 EDT 2007 | jdengler
Good documentation would allow you to make the product without silkscreen. Our operators are trained to use our documentation and not the silkscreen. Silkscreen can be hard to use on many boards and could actually lead to mistakes. Silkscreen is m
Electronics Forum | Fri Aug 17 09:35:15 EDT 2007 | karenp
We usually do Solder reworks, and some components that cannot be installed by SMT Machines or Wave solder due to specs or the technology in our company... aur work methods and instruction are always based on designators and are more illustrated to ca
Electronics Forum | Fri Aug 17 10:50:15 EDT 2007 | Frank
I agree that the documentation should be used and not necessarily the silk screen. The silk screens can be a first line of defense, but nothing beats the proper documentation. Years ago I visited a contract manufacturer that a friend was working at
Electronics Forum | Sat Mar 10 03:19:34 EST 2018 | Nirmal_Bay
Dear expert`s i am need some information regarding what is different between Impact Value and Placement Force. Normally we only used Placement Force for Pick and Place Machine. Any expert`s can explain for Impact Value? Thank You
