Electronics Forum | Thu Sep 20 20:24:09 EDT 2007 | davef
Welcome back to SMTnet, bubba. Depending on your goal select from: * Manufacturing defects tester * In-circuit tester
Electronics Forum | Thu Mar 15 17:28:44 EST 2001 | rentreo
Sounds like a problem I ran into recently. In my case it was a problem with via holes which were used as test points on our in-circuit tester. My problem was caused by moisture in the boards. My cure was a 24 hour bake at 100 deg c.
Electronics Forum | Thu Apr 09 22:50:50 EDT 1998 | Larry
Configuration of our HP 3065 in-circuit tester: HP3065 HL testhead with CL+ controller with 2 hard drives and tape drive 11 Hybrid cards 4 Analog cards 1 GP relay card 2 DUT power supplies (6038A) 1 HP color terminal (2397A) 2 HP terminals (700/92 an
Electronics Forum | Mon Apr 20 10:20:37 EDT 1998 | Joyce Hughes
| | Configuration of our HP 3065 in-circuit tester: | HP3065 HL testhead with CL+ controller with 2 hard drives and tape drive | 11 Hybrid cards | 4 Analog cards | 1 GP relay card | 2 DUT power supplies (6038A) | 1 HP color terminal (2397A) | 2 HP t
Electronics Forum | Mon Jul 07 21:08:17 EDT 2003 | sam
I have an experience about AOI that it is necessary in a complicated PCB. Due to the final circuit design, the concerned PCB were having nets on the boards, that the Open/Short could not be identified by traditional In-Circuit testers. Some long tr
Electronics Forum | Fri May 29 15:03:46 EDT 2009 | rway
We have recently begun using X5R dielectric capacitors. Although they have a better temperature coefficient over Y5V, they age much faster (5-7% logarithmically per decade). I assume the reason for using the X5R was the availability of the capacita
Electronics Forum | Sat Nov 19 03:15:39 EST 2016 | sarason
Does the file come off of an ICT. Next question is it an AGinet/HP/Keysight 3070. If so you have a chance at finding out the format. It is probably posted online in the Keysight manual downloads section. I might still have an old paper copy of this
Electronics Forum | Wed Nov 16 03:41:43 EST 2016 | Haizen
I need to extract data from a log file and sort the data in an Excel file. Details are as follows: - Log File is a measurement result produced by an In-Circuit Tester (no info. about it, no name, no type, nothing). - Measurement Result is from
Electronics Forum | Thu Jun 25 08:30:38 EDT 1998 | Earl Moon
| I have a single-sided board with test vias that pass through the board. The test vias are pasted and reflowed with the SMT components on the top side. When the boards are wavesoldered, the solder coverage on the vias is spotty. Some will sold
Electronics Forum | Thu Jun 25 09:29:01 EDT 1998 | Henry Lee
| | I have a single-sided board with test vias that pass through the board. The test vias are pasted and reflowed with the SMT components on the top side. When the boards are wavesoldered, the solder coverage on the vias is spotty. Some will so
