Electronics Forum | Mon Sep 03 21:33:41 EDT 2018 | aemery
Jeff R, The "24VS" stands for 24VDC Voltage Switched; meaning that it is supplied under machine control and other things have to happen in the machine before 24VS is applied, in this case to KP1 coil. KP1 coil/contact is in place as part of the pow
Electronics Forum | Fri Jul 30 14:53:01 EDT 1999 | Tom B.
Hello Netters, I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinned on exposed
Electronics Forum | Fri Jul 30 17:16:59 EDT 1999 | Dave F
| Hello Netters, | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinned on e
Electronics Forum | Fri Jul 30 17:24:24 EDT 1999 | Dave F
| | Hello Netters, | | | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are tinne
Electronics Forum | Sat Dec 06 11:01:25 EST 1997 | Arulvanan
| I would like to hear from anyone producing high mix (~200 modules) with low volumes (5-2000 per year) using an automatic line running lot sizes in the 5-50 range. We are engaged in an investigation to invest in this capability. A view into the or
Electronics Forum | Mon Feb 04 20:27:25 EST 2002 | davef
1,000 G ohm ||100 M ohm Dielectric Constant ||9.5 ||4.9 Loss Factor ||5 - 20 ||200 * E indicates exponent Continuing: * Spacing between same plane traces effect the electical parameters between the traces. * Dielectric materials used between diff
Electronics Forum | Fri Jul 30 19:58:28 EDT 1999 | ScottM
| | | Hello Netters, | | | | | | I have a customer who wants us to aquaeos wash a PCB after all operations have been performed. The PWB is two layer FR4 with a Transformer, a Multichip Module with Conformal Coating, (6) 11" insulated wires that are
Electronics Forum | Thu Mar 18 07:17:09 EDT 2010 | phomann
Hi, I have a Fisnar I&J500 Selective soldering robot that has failed. I think it is from around 2000. The Fisnar I&J500 base has a soldering attachment on it. As I understand it, the base controller sends it a 5 bit command to the soldering unit. T
Electronics Forum | Fri Jan 21 19:27:54 EST 2000 | Scott S. Snider
With the Siemens line computer it is possible to see what the maximum placements per hours should be for any given job/setup. After you optimize the job you should check that and see how you perform against that number. In many cases the placements
Electronics Forum | Mon Apr 08 00:08:00 EDT 2019 | jamestong
With the increase of labor costs, the popularity of automated production lines, IC tubes, connector tubes, power module tubes, LED tubes, relay tubes and other electronic components tubes are also becoming more widely used. Many small companies blind
