Electronics Forum | Wed Jul 24 15:33:49 EDT 2019 | weglimir
Hello, We've got this DEK256GSX quite some time ago, and finally we've managed to start and initialize it. However the problem is that we don't know edit password, and re-seller that we initially bought this unit from doesn't know the password as w
Electronics Forum | Mon Mar 01 22:51:05 EST 2021 | rob1
We have a DEK 265 Horizon and it exhibits a problem with conveyor belts. When I power up the DEK and try to paste boards, it fails to initialize the conveyor. I have to go into Maintenance and select cycle boards on rails. This too fails, but when I
Electronics Forum | Mon Jun 21 15:42:26 EDT 2021 | pjchonis
Hello everyone, I would love to learn about your thought processes when initially choosing chemistry to be approved in your production lines? What were the pros and cons? Are you still satisfied with your decision? Would you choose a different chem
Electronics Forum | Thu Dec 30 20:48:09 EST 2021 | openindus
We acquired the machine few weeks ago and it was working fine until the printer won't initialize anymore with "USC park failed" error. It seems that the printer won't respond to "4 MAXY_SP 61,0" message. Is someone has already en
Electronics Forum | Mon Apr 18 12:06:03 EDT 2022 | dsmith
During the initialization process, the table will make small movements up and down, and occasionally go all the way up and back down again, then continue to bounce up and down maybe an inch of travel, it never completes initializing. I wasn't operati
Electronics Forum | Thu Apr 28 03:58:52 EDT 2022 | erici
We are having problems with our Siemens Siplace S27 machine. The machine is giving the error - Y-axis Faulty initialization of Motor. We replaced the Y motor card and swapped also the servo control cards on the two gantries. Still will not initiali
Electronics Forum | Wed Nov 30 18:49:41 EST 2022 | proy
I have done some initial testing and looks like a 60W C02 laser can be used effectively for depanelizing boards. Charing initially is significant but by reducing power and making multiple passes AND flooding with Nitrogen I expect this an be reduced
Electronics Forum | Fri Apr 05 01:52:57 EDT 2024 | ddfreeze
Samsung SM321 machine fails to initialize when booting software. I have swapped PCI and communication boards, all resulting the same, I replaced the CMOS battery on communications board, tested the voltage on the backplane, and reloaded the software
Electronics Forum | Thu Oct 03 07:51:11 EDT 2024 | radek
I have another issue with Viscom. At some point, the Axis driver stopped initializing during the startup of VVP. The initialization bar disappeared, and instead of three bars, there are only two. The Axis motor controlled via COM3 and COM4 works fine
Electronics Forum | Wed Jan 12 07:22:10 EST 2005 | cyber_wolf
We seem to have an accountability issue when it comes to operators building defective product. Currently we are putting a piece of masking tape with the assembly #, work order, and operator initials on our black trays at the end of the reflow oven. I
.gif)