Electronics Forum | Wed Oct 05 16:08:12 EDT 2011 | tombstonesmt
We use various Zebra printers for 2D barcodes with great success.
Electronics Forum | Thu Oct 06 09:30:10 EDT 2011 | leemeyer
We use various Zebra printers for 2D barcodes > with great success. We also have had great sucess with our Zebra's. I think that the labels that we are trying to print now on smaller than the printer (170xii) was designed to handle. I am looking f
Electronics Forum | Wed Oct 05 13:30:01 EDT 2011 | leemeyer
We are required by most of our customers to apply a serial # to the boards that we build. As the PC boards have been getting smaller and open areas on the board are getting scarce we have been forced into using smaller and smaller labels. I am lookin
Electronics Forum | Wed Aug 22 12:30:34 EDT 2001 | slthomas
Now that's an approach I've never thought of, inspecting a different portion of each board (I'm assuming that you program a few different patterns and run them sequencially, or something like that). I know our stencil printers don't provide that opti
Electronics Forum | Fri Feb 25 09:09:38 EST 2005 | pjc
Try contacting Sigmaprint at http://www.sigmaprint.co.uk FYI: That priner was made by SMTech in the UK, now shut down. Quad just labeled them.
Electronics Forum | Mon May 13 08:46:16 EDT 2019 | robl
No problem. We are very high mix too, but when we switched to 100% paste inspection to counteract the ineffective paste roll detection we found the printer was now by far the slowest.
Electronics Forum | Mon May 13 08:41:17 EDT 2019 | relaycz
Thank you for your quick answer. We don't have SPI, but our main constrain is pick and place as our production is very high mix. I'll definitely take a look at Ekra and Yamaha.
Electronics Forum | Mon May 13 08:31:48 EDT 2019 | robl
Do you have in line 3D Solder Paste Inspection machines? If not the 2D inspection on the SP710 is very slow & not a patch on Hawkeye from DEK. If print time is not an issue then it doesn't matter. I have had both types of machine, and personally pre
Electronics Forum | Mon May 13 03:37:41 EDT 2019 | relaycz
Hi, I work at an electronics manufacturing company and right now, we are selecting a new screen printer instead of our old Samsung SP-450. Does anyone have some experience with these machines or at least manufacturers? These ones are basic and sim
Electronics Forum | Mon May 13 12:50:35 EDT 2019 | robl
Hi Spoiltforchoice, it depends on what you pay for the printers new, but last time I looked there wasn't much difference in price between the DEKs and the Speedprint if you were buying multiple units. Remember there is huge markups on SMT kit. From
