Electronics Forum | Mon Jul 05 18:40:24 EDT 1999 | JohnW
| Dear All, | | We are a medium sized Electronic manufacturing company manufacturing computer motherboards and Telecommunication products. We have a big debate going on within our company regarding the defect rate measurement technique. | | At p
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Mon Jul 14 16:26:58 EDT 2003 | slthomas
Yes, they do the cleaning, we did the (apparently first) inspection and caught the problems. They tried a shorter cleaning cycle, witnessed no defects, and attributed the defects on the boards we had to their cleaning process. Now they just plan on
Electronics Forum | Thu May 17 22:41:05 EDT 2001 | davef
Hi Bob Still getting the cushy jobs, eh? [Tennent's and McEwans are two of my favorites. "Ahh, Beer! My one weakness...my Achilles Heel, if you will..." Homer J Simpson Quote 89/114] Under "Acceptable" for "Pin-In-Hole/Intrusive Reflow Inspection
Electronics Forum | Fri Feb 13 08:41:45 EST 2015 | emeto
Hi, I have MV-7xi from Mirtec. Mine is equipped with the best camera they have as well as telecentric lens which give you very good resolution and view. Machine handles very good most of the defects in SMT. However, when we go to the solder joints i
Electronics Forum | Mon Feb 13 14:34:31 EST 2006 | pjc
The best way to compare is ask each machine company to bring their machine in for a demo. Since they are bench-top machines, they are easy to transport. Pick one of your boards for them to run. Don't send any board data ahead of time. When they come
Electronics Forum | Sun Dec 10 11:55:16 EST 2000 | Bob Willis
The following may be of interest to you. INTRODUCTION TO X-RAY INSPECTION All text Copyright Bob Willis, EPS INTRODUCTION TO X-RAY INSPECTION The use of X-ray inspection is becoming very popular due to the increased use of Ball Grid Array (BGA)
Electronics Forum | Sun Dec 10 11:55:28 EST 2000 | Bob Willis
The following may be of interest to you. INTRODUCTION TO X-RAY INSPECTION All text Copyright Bob Willis, EPS INTRODUCTION TO X-RAY INSPECTION The use of X-ray inspection is becoming very popular due to the increased use of Ball Grid Array (BGA)
Electronics Forum | Sun Dec 10 11:56:05 EST 2000 | Bob Willis
The following may be of interest to you. INTRODUCTION TO X-RAY INSPECTION All text Copyright Bob Willis, EPS INTRODUCTION TO X-RAY INSPECTION The use of X-ray inspection is becoming very popular due to the increased use of Ball Grid Array (BGA)
Electronics Forum | Wed Mar 28 11:53:50 EST 2001 | Steve
Take the leap of faith my friend!! Buy the AOI and watch all of your problems disappear. Okay, so I exaggerated a bit. Let me tell you the real story. We purchased a CR Technology RTI6500 almost two years ago. We chose the CR Tech unit because it wa
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936