Electronics Forum | Tue May 04 14:15:46 EDT 2004 | michasm2
I'm looking for some input on a pay scale for experienced SRT/DRS operators. They do not do any profiling or process work - only remove/site prep/replace type work, along with any 'special' jobs like trace repair, masking repair, etc. They're current
Electronics Forum | Thu Jun 02 12:44:13 EDT 2005 | russ
Your inspection people will tell you what they need. We have some that prefer to stand while others sit. It has to do with chair / table / operator heights. e.g. tall table with a short operator they will want/need to stand and vice versa. Usuall
Electronics Forum | Mon Aug 17 20:55:14 EDT 2020 | stephendo
Support. You will want a radiation survey done annually. At a previous company having the manufacturer do it would have meant paying for the air fare and hotel for their tech to do it. I had found a company that usually did other things but could do
Electronics Forum | Thu Apr 19 20:14:09 EDT 2012 | eadthem
I don't, My desk causally is piled with papers, programming printouts, PCB's with defects to be resolved, and spare/broken parts from the SMT machines. For me its more important to help the SMT department and SMT Inspection department get better or
Electronics Forum | Mon Aug 31 15:21:04 EDT 2015 | zombee
Dear Users! I have a Topaz pick&place machine, but the conveyor motor is not working. 1st test - production: Start production in "operation" menu: if I put the PCB the entrace of machine, the assembly head-bank picks up the first 8 components (prec
Electronics Forum | Tue May 18 22:12:52 EDT 2004 | Ken
I have considered using the same security methods employed at thousands of Gas stations across the USA. The bathroom key is attached to a large carburator, tire rim, or any 30 pound piece of towing chain! Seriously, I look at my processes and try a
Electronics Forum | Thu Nov 17 13:38:07 EST 2005 | SuMoTe
Have all of you "Fire Them" type mentalities ever herd the old addage "Never tech your own work"? Inspection should be done by inspectors.
Electronics Forum | Thu Nov 17 17:32:07 EST 2005 | russ
Good point tommy, I think we are confusing what we are talking about here. It was not asked if the operators should do inspection. It was asked if an operator should pass boards through a machine. The operator is not inspecting anything just as t
Electronics Forum | Thu Nov 17 13:04:58 EST 2005 | tommyttr
AOI should be operated by an INSPECTOR! Inspectors do not operate assembly machines or automated assembly equipment, why would an operator run an Automated Inspection? Are your operators certified to IPC standards to make calls on bad solder joints o
Electronics Forum | Thu Jul 30 08:46:12 EDT 2015 | hemantp
We are having X-Ray Machine X TEK HMXST-160 The machine is working fine with respect to Interlocking , X-ray on , but not able to zoom and move the Joystick positions ,it is stand only in one position while starting the application we are getting
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
