Electronics Forum | Fri Jun 26 22:57:15 EDT 2020 | daisy_mu
Hello We are working with inspection Omron machine (VT-S730), we have cycle time problems with some models. Does anyone know why this happens? Months ago, the cycle time was fine, but now it is so high and our production is less. Thank you
Electronics Forum | Mon Feb 15 17:06:25 EST 2021 | bobym
Are You using "Output CSV" Option? When you have a lot of CSV files on the same folder the inspection gets slow.
Electronics Forum | Tue Jun 30 11:12:58 EDT 2020 | dontfeedphils
AOI cycle times typically increase as defects/false calls found increases. If it's not that then possibly aging hardware or something has become corrupt in the software?
Electronics Forum | Tue Jun 30 18:07:34 EDT 2020 | daisy_mu
Hi Phill Thank you, It´s a possibility because that model has many false calls and real defects, but only in one component. A while back we had a similar problem and we changed the component number to a new one, and the cycle time was better, but th
Electronics Forum | Tue Jun 30 18:11:19 EDT 2020 | daisy_mu
Hi Stephen Thank you, is a similary work, I can check the images to compare and delete if there are excess.
Electronics Forum | Tue Jun 30 11:29:37 EDT 2020 | stephendo
I don't the Omron but I have worked with one where if you taught more acceptable windows then over time the machine slowed down because it had to do more checking. On that machine a false fail could be added to the library. Over time each component c
Electronics Forum | Wed Jan 19 20:54:36 EST 2022 | emeto
Hello experts, We have hard time with a tantalum capacitor challenging our 12mm feeder. Pocket seems to small for the part and parts are getting stuck and cannot be picked. In my opinion this part should use 16mm on 12mm pitch rather than 12mm tape
Electronics Forum | Wed May 16 07:08:23 EDT 2001 | Michael Fogel
We are using press fit connector for some time without any particular visible problems, but still we need some kind of workmanship standard as a general guideline of what is wrong, acceptable and preferred levels for this job. Can someone direct me w
Electronics Forum | Mon Jan 24 11:07:30 EST 2022 | jineshjpr
Hi, In general Tantalum D & E case packages prefers 12mm Reel with sufficient height. Make sure that no external force has been applied to the reel ( where it causes pocket deformation) thus leads to prevent smooth component release. Slowdown the noz
Electronics Forum | Thu Mar 28 13:19:14 EDT 2019 | davef
There is no industry standard for BTC stand-off height. "IPC-7093A Design and Assembly Process Implementation for Bottom Termination SMT (BTC) Components" just finished "Final Draft for Industry Review" in December 2018. It mentions stand-off height
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
