Electronics Forum | Fri Nov 18 13:09:04 EST 2005 | jbrower
We are looking into purchasing an AOI sysstem and will have the operators run the system. With the right training our staff will do a great job and it will make their job easier. Currently we are relying on the Mark II eyeball. As for inspectors w
Electronics Forum | Fri Apr 20 14:11:27 EDT 2012 | rway
Programming is different, yes, but so is the terminology. ///with machine vision you have parameters that select what is good and what is bad, and you have parameters that help make bad look worse and good look better making the difference between w
Electronics Forum | Mon Jul 20 23:09:27 EDT 1998 | Stoney Tsai
We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. Thx for any information Best Regards, Stoney Tsai
Electronics Forum | Sat Aug 15 07:52:48 EDT 1998 | Clyde F.
| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai
Electronics Forum | Wed Nov 16 12:16:27 EST 2005 | james
Just wondering who should really operate an AOI? Should it be the SMT operator or the Inspector? We are trying to run the AOI inline but Operators do not feel it is their job to do so. Just wondering how others are handling it.
Electronics Forum | Thu Nov 17 13:38:07 EST 2005 | SuMoTe
Have all of you "Fire Them" type mentalities ever herd the old addage "Never tech your own work"? Inspection should be done by inspectors.
Electronics Forum | Fri May 26 10:33:10 EDT 2006 | pms
Thanks for the inputs. No time for DOE's (you know the drill). I need to get this inspector off my arss. I'm gonna give the inspector Russ's 25% answer AND his e-mail address !!!! LOL
Electronics Forum | Tue Jun 24 11:51:24 EDT 2008 | paul_bmc
Who performs SPC (Statistical Process Control) in your surface mount or through hole department? The machine operator, an inspector, or a seperate SPC inspector?
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
