Electronics Forum | Thu Apr 18 23:15:26 EDT 2002 | fastek
If Universal for example decides they want to implement a registration fee to pursade customers from buying used then why have they dropped their shorts from $20,000 to register a GSM in 2000 to $2,000 recently? Guess they were tired of losing custom
Electronics Forum | Mon May 03 20:00:44 EDT 1999 | Todd Kuchta
I would like any information on Royce instruments. They make table top test equipment and pick and place machines. Anyone who may have purchased or used one of their machines. Also, who are their competitors. Why would I buy their equipment and w
Electronics Forum | Thu May 11 09:14:04 EDT 2017 | sumote
I am in the exact situation. Now using my conveyor as a table.
Electronics Forum | Mon Aug 06 10:03:01 EDT 2007 | slthomas
I agree with jdengler on the rotary table being skewed. You need a couple of dowel pins (1 1/2" long x 1/4" dia., I think) to align that disk. Each idler is held on an eccentric cam and can be adjusted to square up the rotary table by dropping the do
Electronics Forum | Fri Aug 03 12:31:43 EDT 2007 | jdengler
You probably do not have "Drift". The rotary table and or fixture may not be square. The rotary table can be adjusted. You should have someone who has done this before available to make the adjustment before you try it yourself. You can check the
Electronics Forum | Thu Mar 26 10:18:42 EST 1998 | Randall Jacobs
John, I realize that I am late to the table but if you are still interested, please contact me at jacobs@uic.com and I can provide you with assistance. I am sure Universal can satisfy any requirements you may have. Randall Jacobs Product Specialist
Electronics Forum | Mon Aug 13 14:11:14 EDT 2007 | jeffharley
Slot 11 in the I/O box is the one for B.E.C. pcb, the offset is 2125 in the x and 500 in the y axis. The template for the B.E.C. is triangle in shape and is the length from corner to corner on the rotary table. You can also type in sh sys and look to
Electronics Forum | Tue Jul 10 08:45:12 EDT 2001 | stefwitt
There are several low cost vision systems ( under $ 5,000) on the market: http://www.dvtsensors.com" ,Keyence, Texas Instruments, Imagenation. If they can capture the image in one shot ( comparing with one good board ) depends on the camera resolutio
Electronics Forum | Thu Jan 14 10:25:36 EST 1999 | J. Coogan
Doug The 4796A and 4796R machines maintain maximum tact time within an XY table movement window of approximately 17mm. In addition, due to their ability to perform "on-the-fly" theta correction, they are also able to maintain top speed for a larger
Electronics Forum | Fri Sep 24 22:43:07 EDT 2004 | FengAng
Hi Rob, We use the most advanced equipments in front end, but the back end we always use manual assembly, including display, LCD, casing. It's all because we should balance the cost & efficiency. I think if you are the boss, you will also do thing
