Electronics Forum | Sun Apr 14 00:04:50 EDT 2002 | lysik
Just to let all the folks no. If you register (and pay the fee) a machine with any (OEM) company in the USA You have the same rights as a new user. Companies like UIC, Gen Rad, Agilent, etc came up with these fees to discourage buying used equipment.
Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Tue Dec 14 15:21:41 EST 1999 | BJL
This may be the nickle paladium lead material or an 87/13 tin lead plating on the leads. Paladium and 87/13 has a slower disolution rate and takes longer for solid joint to be created between two metal surfaces. Reflow temp must allow the joint to be
Electronics Forum | Thu Dec 09 17:18:44 EST 1999 | Russ
Ron, I'll bet you have the Ni/Pd finsh on these components! We have had the same problem in our shop. Not knowing the Kester spec. we had to raise the max temp to 220 Deg. C and increase the time above liquidous to 60 seconds or greater. It seem
Electronics Forum | Tue Apr 06 20:28:41 EDT 1999 | Scott McKee
| I need help in finding solder paste measuring equipment. | Height, length, width, area, volume after printing (off line): 1. Cyberoptics:1-800-745-6315 www.cyberoptics.com 2. Manix Manufacturing 1-215-953-9797 3. Theta Group 1-205-650-0535 4.
Electronics Forum | Thu Jun 19 10:22:53 EDT 2003 | A J. Morin ...of A. R. T. (Automation Resources & Technologies)
I would like to say that if anyone is having problems getting technical support service for their equipment and have not registered their equipment and paid that fee,you may get service by contacting A J Morin (of ART) and we may be able to service y
Electronics Forum | Tue Nov 28 08:27:05 EST 2006 | davef
Choices are: * IPC-RB-276 [superseded by IPC-6011/6012], Section 5 discusses some basic shipping and packaging requirements. Also, it references ASTM D-3951 and MIL-P-116. * Universal Instruments has done a nice job putting together a packaging speci
Electronics Forum | Tue Jun 28 11:45:27 EDT 2011 | jax
I have multiple machines consisting of a mix of the following: Single beam Lightning head machines (Advantis, Lead Screw) Dual Beam Seven Spindle machines (Genesis, Linear Drive) Single Beam Seven Spindle Machines Advantis, Lead Screw) The vintage ra
Electronics Forum | Tue Nov 11 17:35:08 EST 2008 | davef
SM-840, is a material qualification document only, with all the test requirements applicable only to a defined test coupon, not to production boards. So, it's useless for what you're trying to accomplish. As assemblers use A-610 - Acceptability Of E
Electronics Forum | Fri Oct 08 02:19:01 EDT 1999 | Brian
| Is anyone aware of a web page for military spec's? I am looking for Mil-P-28809. | | Thanks, | Mike Demos | MIL-P-28809 is definitely obsolete. Not only obsolete, it was possibly the most scientifically flawed standard ever to to be printed. I
